The current `admin auth` CLI for managing authentication source of type
LDAP via BindDN and Simple LDAP does not allow enabling the respective
source, once disabled via `--not-active`.
The same applies to `--synchronize-users` specifially for LDAP via
BindDN.
These changes add two new flags to LDAP related CLI commands:
- `--active` for both LDAP authentication source types
- `--disable-synchronize-users` for LDAP via BindDN
Signed-off-by: justusbunsi <61625851+justusbunsi@users.noreply.github.com>
This PR adds a new manager command to switch on SQL logging and to turn it off.
```
gitea manager logging log-sql
gitea manager logging log-sql --off
```
Signed-off-by: Andrew Thornton <art27@cantab.net>
fgprof is a sampling Go profiler that allows you to analyze On-CPU as
well as Off-CPU (e.g. I/O) time together.
Go's builtin sampling CPU profiler can only show On-CPU time, but it's
better than fgprof at that. Go also includes tracing profilers that can
analyze I/O, but they can't be combined with the CPU profiler.
fgprof is designed for analyzing applications with mixed I/O and CPU
workloads. This kind of profiling is also known as wall-clock profiling.
Whilst fgprof can cause significant STW latencies in applications with a
lot of goroutines (> 1-10k), these latencies only occur if the profile
is requested - it doesn't cause a delay by simply being available.
The fgprof profile is mounted on
`http://localhost:6060/debug/fgprof?seconds=3`
Signed-off-by: Andrew Thornton <art27@cantab.net>
* clean git support for ver < 2.0
* fine tune tests for markup (which requires git module)
* remove unnecessary comments
* try to fix tests
* try test again
* use const for GitVersionRequired instead of var
* try to fix integration test
* Refactor CheckAttributeReader to make a *git.Repository version
* update document for commit signing with Gitea's internal gitconfig
* update document for commit signing with Gitea's internal gitconfig
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- We don't need to buffer the logger with a thousand capacity. It's not
a high-throughput logger, this also caused issue whereby the logger
can't keep up with repeated messages being send(somehow they are lost in
the queue?).
- Resolves#19969
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix cli command restore-repo: "units" should be parsed as StringSlice because after #15790 it's read by c.StringSlice("units"). Before, the "units" were processed by strings.Split
* Add checking for invalid unit names
Co-authored-by: 6543 <6543@obermui.de>
* Move access and repo permission to models/perm/access
* fix test
* Move some git related files into sub package models/git
* Fix build
* fix git test
* move lfs to sub package
* move more git related functions to models/git
* Move functions sequence
* Some improvements per @KN4CK3R and @delvh
* Move some repository related code into sub package
* Move more repository functions out of models
* Fix lint
* Some performance optimization for webhooks and others
* some refactors
* Fix lint
* Fix
* Update modules/repository/delete.go
Co-authored-by: delvh <dev.lh@web.de>
* Fix test
* Merge
* Fix test
* Fix test
* Fix test
* Fix test
Co-authored-by: delvh <dev.lh@web.de>
When Gitea is running as PID 1 git will occassionally orphan child processes leading
to (defunct) processes. This PR simply sets Setpgid to true on these child processes
meaning that these defunct processes will also be correctly reaped.
Fix#19077
Signed-off-by: Andrew Thornton <art27@cantab.net>
* docs: update the ROOT documentation and error messages
* The documentation now reflects what happens in the
setting/repository.go::newRepository function:
filepath.Join(AppWorkPath, RepoRootPath) was missing.
* The error message displayed when RepoRootPath is not found now
displays the value of RepoRootPath. Given the complexity of the
construction of this value, only referring to it in the abstract
is likely to be misleading to the Gitea admin trying to interpret
the message.
Co-authored-by: delvh <dev.lh@web.de>
* Apply DefaultUserIsRestricted in CreateUser
* Enforce system defaults in CreateUser
Allow for overwrites with CreateUserOverwriteOptions
* Fix compilation errors
* Add "restricted" option to create user command
* Add "restricted" option to create user admin api
* Respect default setting.Service.RegisterEmailConfirm and setting.Service.RegisterManualConfirm where needed
* Revert "Respect default setting.Service.RegisterEmailConfirm and setting.Service.RegisterManualConfirm where needed"
This reverts commit ee95d3e8dc.
* When dumping trim the standard suffices instead of a random suffix
Instead of using the `path.Ext()` to trim the last "extension" suffix, just iterate
through the supported suffices and trim those.
Fix#19424
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix enum with to have correct supported types only
Co-authored-by: 6543 <6543@obermui.de>
* Warn on SSH connection for incorrect configuration
- When `setting.RepoRootPath` cannot be found(most likely due to
incorrect configuration) show "Gitea: Incorrect configuration" on the
client-side to help easier with debugging the problem.
* Update cmd/serv.go
Co-authored-by: delvh <dev.lh@web.de>
* Don't leak configuration
* Update cmd/serv.go
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Follows: #19284
* The `CopyDir` is only used inside test code
* Rewrite `ToSnakeCase` with more test cases
* The `RedisCacher` only put strings into cache, here we use internal `toStr` to replace the legacy `ToStr`
* The `UniqueQueue` can use string as ID directly, no need to call `ToStr`
Follows #19266, #8553, Close#18553, now there are only three `Run..(&RunOpts{})` functions.
* before: `stdout, err := RunInDir(path)`
* now: `stdout, _, err := RunStdString(&git.RunOpts{Dir:path})`
Continues on from #19202.
Following the addition of pprof labels we can now more easily understand the relationship between a goroutine and the requests that spawn them.
This PR takes advantage of the labels and adds a few others, then provides a mechanism for the monitoring page to query the pprof goroutine profile.
The binary profile that results from this profile is immediately piped in to the google library for parsing this and then stack traces are formed for the goroutines.
If the goroutine is within a context or has been created from a goroutine within a process context it will acquire the process description labels for that process.
The goroutines are mapped with there associate pids and any that do not have an associated pid are placed in a group at the bottom as unbound.
In this way we should be able to more easily examine goroutines that have been stuck.
A manager command `gitea manager processes` is also provided that can export the processes (with or without stacktraces) to the command line.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove `db.DefaultContext` usage in routers, use `ctx` directly
* Use `ctx` directly if there is one, remove some `db.DefaultContext` in `services`
* Use ctx instead of db.DefaultContext for `cmd` and some `modules` packages
* fix incorrect context usage
* Add setting for a JSON that maps LDAP groups to Org Teams.
* Add log when removing or adding team members.
* Sync is being run on login and periodically.
* Existing group filter settings are reused.
* Adding and removing team members.
* Sync not existing LDAP group.
* Login with broken group map JSON.
* Refactor jwt.StandardClaims to RegisteredClaims
go-jwt/jwt has deprecated the StandardClaims interface to use RegisteredClaims
instead. This PR migrates to use this new format.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Make router logger more friendly, show the related function name/file/line.
[BREAKING]
This PR substantially changes the logging format of the router logger. If you use this logging for monitoring e.g. fail2ban you will need to update this to match the new format.
This PR continues the work in #17125 by progressively ensuring that git
commands run within the request context.
This now means that the if there is a git repo already open in the context it will be used instead of reopening it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
if return a error message to cli, it will print it
to stderr which is duplicate with our code (line 82
in same file). so user will see two line same
error message in git output. I think it's not mecessary,
so suggerst not return error message to cli. Thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
Migrate from U2F to Webauthn
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
