This Pull Request addresses a race condition in the updateIframeHeight
function where it is sometimes called when the iframe is not fully
loaded or accessible resulting in an alarming error message for the
user.
To address this we:
1. Add defensive programming within the updateIframeHeight function
2. Delay instantiating the intersection observer until the iframe has
loaded
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Many files do not directly depend on jQuery now.
To clarify the usage: use `fomanticQuery` to operate Fomantic
components.
Then developers could focus on removing the remaining jQuery usages by
searching `import $` globally.
21 files now:
```
./components/RepoBranchTagSelector.vue:3:import $ from 'jquery';
./features/admin/common.ts:1:import $ from 'jquery';
./features/admin/emails.ts:1:import $ from 'jquery';
./features/common-button.ts:1:import $ from 'jquery';
./features/comp/ComboMarkdownEditor.ts:3:import $ from 'jquery'; (I am working on it, there will be a new PR)
./features/comp/LabelEdit.ts:1:import $ from 'jquery';
./features/notification.ts:1:import $ from 'jquery';
./features/org-team.ts:1:import $ from 'jquery';
./features/repo-code.ts:1:import $ from 'jquery';
./features/repo-common.ts:1:import $ from 'jquery';
./features/repo-diff.ts:1:import $ from 'jquery';
./features/repo-editor.ts:1:import $ from 'jquery';
./features/repo-issue-content.ts:1:import $ from 'jquery';
./features/repo-issue-list.ts:1:import $ from 'jquery';
./features/repo-issue-sidebar.ts:1:import $ from 'jquery';
./features/repo-issue.ts:1:import $ from 'jquery';
./features/repo-legacy.ts:1:import $ from 'jquery';
./features/repo-new.ts:1:import $ from 'jquery';
./features/repo-projects.ts:1:import $ from 'jquery';
./features/repo-settings.ts:1:import $ from 'jquery';
./features/repo-template.ts:1:import $ from 'jquery';
```
There were too many patches to the Render system, it's really difficult
to make further improvements.
This PR clears the legacy problems and fix TODOs.
1. Rename `RenderContext.Type` to `RenderContext.MarkupType` to clarify
its usage.
2. Use `ContentMode` to replace `meta["mode"]` and `IsWiki`, to clarify
the rendering behaviors.
3. Use "wiki" mode instead of "mode=gfm + wiki=true"
4. Merge `renderByType` and `renderByFile`
5. Add more comments
----
The problem of "mode=document": in many cases it is not set, so many
non-comment places use comment's hard line break incorrectly
Follow #32460
Now the code could be much clearer than before and easier to maintain. A
lot of legacy code is removed.
Manually tested.
This PR is large enough, that fine tunes could be deferred to the future if
there is no bug found or design problem.
Screenshots:
<details>
![image](https://github.com/user-attachments/assets/35f4ab7b-1bc0-4bad-a73c-a4569328303c)
</details>
Fix#32453
Major changes:
* revert the `<div class="divider"></div>` in
`templates/repo/issue/branch_selector_field.tmpl` (it was removed by
mistake in ##32444)
* remove incorrect `<div class="inline field">` in
`templates/repo/issue/sidebar/allow_maintainer_edit.tmpl`
* use `gt-ellipsis` to replace the "title" class in the dependency list,
then `.repository .issue-content-right .ui.list .title` could be removed
* remove the "relaxed" from dependency list, then there is no padding,
then `.repository .issue-content-right .ui.list .dependency` could be
removed (`white-space` doesn't have effect either because there is
`gt-ellipsis`)
* remove dead code `.repository .issue-content-right #deadlineForm input
`
The fixed UI should be the same as before.
The "primary button" is used at many places, but sometimes they might
conflict (due to button switch, hidden panel, dropdown menu, etc).
Sometimes we could add a special CSS class for the buttons, but
sometimes not (see the comment of QuickSubmit)
This PR introduces `querySingleVisibleElem` to help to get the correct
primary button (the only visible one), and prevent from querying the
wrong buttons.
Fix#32437
---------
Co-authored-by: silverwind <me@silverwind.io>
Use zero instead of 9999-12-31 for deadline
Fix#32291
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Only move code, no unnecessary logic change. (There are many problems in
old code, but changing them is not in this PR's scope)
Co-authored-by: Giteabot <teabot@gitea.io>
- Prefer
[window.location.assign](https://developer.mozilla.org/en-US/docs/Web/API/Location/assign)
over assigning to
[window.location](https://developer.mozilla.org/en-US/docs/Web/API/Window/location)
which typescript does not like. This works in all browsers including
PaleMoon.
- Fix all typescript issues in `web_src/js/webcomponents`, no behaviour
changes.
- ~~Workaround bug in `@typescript-eslint/no-unnecessary-type-assertion`
rule.~~
- Omit vendored file from type checks.
- `tsc` error count is reduce by 53 with these changes.
Migrated a handful Vue components to the `setup` syntax using
composition api as it has better Typescript support and is becoming the
new default in the Vue ecosystem.
- [x] ActionRunStatus.vue
- [x] ActivityHeatmap.vue
- [x] ContextPopup.vue
- [x] DiffFileList.vue
- [x] DiffFileTree.vue
- [x] DiffFileTreeItem.vue
- [x] PullRequestMergeForm.vue
- [x] RepoActivityTopAuthors.vue
- [x] RepoCodeFrequency.vue
- [x] RepoRecentCommits.vue
- [x] ScopedAccessTokenSelector.vue
Left some larger components untouched for now to not go to crazy in this
single PR:
- [ ] DiffCommitSelector.vue
- [ ] RepoActionView.vue
- [ ] RepoContributors.vue
- [ ] DashboardRepoList.vue
- [ ] RepoBranchTagSelector.vue
These settings can allow users to only display the repositories explore page.
Thanks to yp05327 and wxiaoguang !
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR fixes javascript errors when an anonymous user visits the
migration page.
It also makes task view checking more restrictive.
The router moved from `/user/task/{id}/status` to
`/username/reponame/-/migrate/status` because it's a migrate status.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#13489
In the original implementation, only `All` will display your owned and
collaborated repositories. For other filters like `Source`, `Mirrors`
and etc. will only display your owned repositories.
This PR removed the limitations. Now except `collbrations`, other
filters will always display your owned and collaborated repositories.
Fixes https://github.com/go-gitea/gitea/issues/31686.
A more elborate manual tabindex numbering could be done, but I think
it's not really worth the extra effort and such stuff could easily break
during refactors.
Includes another small tweak to un-stretch the`<a>` element so it's only
as large as it needs to be and this change also made the margin
unneeded.
In Projects, columns heights are defined by the sum of all contents
height of the biggest column, rather than a fraction of the viewport
height. It default to 60vh when there is no cards to display.
Fix#31666
The normal themes already have a variant which automatically chooses
light/dark mode based on the browser.
This PR adds the same variant, but for the colorblind themes.
- When pasting a URL over another URL, replace the URL instead of
creating a useless `[url](url)`. This is the 1-line change
[here](https://github.com/go-gitea/gitea/pull/31948/files#diff-be8e94d7e3da33b187381f53d28095107bd0cf29ae9a9e997e4f422f4a54479cR122).
- Always run `initTextareaEvents`, previously it was not run when
`dropzoneEl` was not present like when attachements are disabled on the
server. Refactored the function to gracefully handle absent `dropzoneEl`
and rename the function to a better name.
Update mermaid to
[v11](https://github.com/mermaid-js/mermaid/releases/tag/v11.0.0) and
enable the new [`suppressErrorRendering`
option](https://github.com/mermaid-js/mermaid/pull/4359) to ensure
mermaid never renders error elements into the DOM (we have per-chart
error rendering, so don't need it). Tested various chart types.
BTW, I was unable to reproduce that error rendering from mermaid with
`suppressErrorRendering: false` and I thought we had some CSS to hide
the error element, but I could not find it, not even in git history.
fix#23668
My plan:
* In the `actions.list` method, if workflow is selected and IsAdmin,
check whether the on event contains `workflow_dispatch`. If so, display
a `Run workflow` button to allow the user to manually trigger the run.
* Providing a form that allows users to select target brach or tag, and
these parameters can be configured in yaml
* Simple form validation, `required` input cannot be empty
* Add a route `/actions/run`, and an `actions.Run` method to handle
* Add `WorkflowDispatchPayload` struct to pass the Webhook event payload
to the runner when triggered, this payload carries the `inputs` values
and other fields, doc: [workflow_dispatch
payload](https://docs.github.com/en/webhooks/webhook-events-and-payloads#workflow_dispatch)
Other PRs
* the `Workflow.WorkflowDispatchConfig()` method still return non-nil
when workflow_dispatch is not defined. I submitted a PR
https://gitea.com/gitea/act/pulls/85 to fix it. Still waiting for them
to process.
Behavior should be same with github, but may cause confusion. Here's a
quick reminder.
*
[Doc](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#workflow_dispatch)
Said: This event will `only` trigger a workflow run if the workflow file
is `on the default branch`.
* If the workflow yaml file only exists in a non-default branch, it
cannot be triggered. (It will not even show up in the workflow list)
* If the same workflow yaml file exists in each branch at the same time,
the version of the default branch is used. Even if `Use workflow from`
selects another branch
![image](https://github.com/go-gitea/gitea/assets/3114995/4bf596f3-426b-48e8-9b8f-0f6d18defd79)
```yaml
name: Docker Image CI
on:
workflow_dispatch:
inputs:
logLevel:
description: 'Log level'
required: true
default: 'warning'
type: choice
options:
- info
- warning
- debug
tags:
description: 'Test scenario tags'
required: false
type: boolean
boolean_default_true:
description: 'Test scenario tags'
required: true
type: boolean
default: true
boolean_default_false:
description: 'Test scenario tags'
required: false
type: boolean
default: false
environment:
description: 'Environment to run tests against'
type: environment
required: true
default: 'environment values'
number_required_1:
description: 'number '
type: number
required: true
default: '100'
number_required_2:
description: 'number'
type: number
required: true
default: '100'
number_required_3:
description: 'number'
type: number
required: true
default: '100'
number_1:
description: 'number'
type: number
required: false
number_2:
description: 'number'
type: number
required: false
number_3:
description: 'number'
type: number
required: false
env:
inputs_logLevel: ${{ inputs.logLevel }}
inputs_tags: ${{ inputs.tags }}
inputs_boolean_default_true: ${{ inputs.boolean_default_true }}
inputs_boolean_default_false: ${{ inputs.boolean_default_false }}
inputs_environment: ${{ inputs.environment }}
inputs_number_1: ${{ inputs.number_1 }}
inputs_number_2: ${{ inputs.number_2 }}
inputs_number_3: ${{ inputs.number_3 }}
inputs_number_required_1: ${{ inputs.number_required_1 }}
inputs_number_required_2: ${{ inputs.number_required_2 }}
inputs_number_required_3: ${{ inputs.number_required_3 }}
jobs:
build:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v3
- run: ls -la
- run: env | grep inputs
- run: echo ${{ inputs.logLevel }}
- run: echo ${{ inputs.boolean_default_false }}
```
![image](https://github.com/go-gitea/gitea/assets/3114995/a58a842d-a0ff-4618-bc6d-83a9596d07c8)
![image](https://github.com/go-gitea/gitea/assets/3114995/44a7cca5-7bd4-42a9-8723-91751a501c88)
---------
Co-authored-by: TKaxv_7S <954067342@qq.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
When a long line with characters such as dots is returned by a step in
an action (e.g. by the output of the Ruby on Rails test runner), it
overflows the log container, causing the page to scroll sideways.
This PR adds the CSS `overflow-wrap: anywhere;` to the
`.job-step-section .job-step-logs .job-log-line .log-msg` selector,
which causes such lines to wrap as well
As discussed in #31667 & #26561, when a card on a Project contains
images, they can overflow the card on its containing column. This aims
to fix this issue via snapping scrollbars.
---
Issue #31667 is open to discussion as there should be room for
improvement.
Adds types to various low-level modules. All changes are type-only, no
runtime changes. `tsc` now reports 38 less errors.
One problem was that `@types/sortablejs` does not accept promise return
in its functions which triggered the linter, so I disabled the rules on
those line.
None of the frontend js/ts files was touched besides these two commands
(edit: no longer true, I touched one file in
61105d0618
because of a deprecation that was not showing before the rename).
`tsc` currently reports 778 errors, so I have disabled it in CI as
planned.
Everything appears to work fine.
1. Add some general guidelines how to write our typescript code
2. Add `@typescript-eslint/eslint-plugin`, general typescript rules
3. Add `eslint-plugin-deprecation` to detect deprecated code
4. Fix all new lint issues that came up
closes#22015
After adding a passkey, you can now simply login with it directly by
clicking `Sign in with a passkey`.
![Screenshot from 2024-06-26
12-18-17](https://github.com/go-gitea/gitea/assets/6918444/079013c0-ed70-481c-8497-4427344bcdfc)
Note for testing. You need to run gitea using `https` to get the full
passkeys experience.
---------
Co-authored-by: silverwind <me@silverwind.io>
Many avatars were rendered in HTML with certain width/height but then
resized again in CSS. This was pointless so I removed all these cases
and made the HTML size match the previous render size.
Also did a few CSS cleanups in the tribute rendering:
<img width="648" alt="image"
src="https://github.com/go-gitea/gitea/assets/115237/cb2fafb3-5e20-46e9-814f-07df20038beb">
This enables eslint to use the typescript parser and resolver which
brings some benefits that eslint rules now have type information
available and a tsconfig.json is required for the upcoming typescript
migration as well. Notable changes done:
- Add typescript parser and resolver
- Move the vue-specific config into the root file
- Enable `vue-scoped-css/enforce-style-type` rule, there was only one
violation and I added a inline disable there.
- Fix new lint errors that were detected because of the parser change
- Update `i/no-unresolved` to remove now-unnecessary workaround for the
resolver
- Disable `i/no-named-as-default` as it seems to raise bogus issues in
the webpack config
- Change vitest config to typescript
- Change playwright config to typescript
- Add `eslint-plugin-playwright` and fix issues
- Add `tsc` linting to `make lint-js`
Not sure if this is a regression from
https://github.com/go-gitea/gitea/pull/30513, but when attachments are
disabled, `this.dropzone` is null and the code had failed in
`initEasyMDEPaste` trying to access `dropzoneEl.dropzone`.
make preventDuplicates default to true, users get a clear UI feedback
and know that "a new message appears".
Fixes: https://github.com/go-gitea/gitea/issues/26651
---------
Co-authored-by: silverwind <me@silverwind.io>
* Use dropzone to handle file uploading for all cases, including pasting
and dragging
* Merge duplicate code, use consistent behavior for link generating
Close#20130
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The overflow menu button was incorrectly included in the measurement of
the width of the items. As a result, it could get stuck in a loop
alternating between different measurements as the button appears and
disappears.
Given an empty issue/PR comment, the comment history would not be
updated if the user were to submit it. Therefore, it would make since to
just disable the comment button when the text editor is empty.
This is inline with what GitHub does when given empty text editor input.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Almost works like GitHub
* use Tab/Shift-Tab to indent/unindent the selected lines
* use Enter to insert a new line with the same indentation and prefix
The avatar on "New Issue" and "New Pull Request" pages was inconsistent.
Removed the extra margin and the new CSS rules now use common parent
`<form id="#new-issue">` because `.repository.new.issue` is not present
on pull request page.
- Result of `make update-js`
- Added 1 new eslint rule
- Autofixed 1 new eslint issue
- Remove `eslint-plugin-jquery` as `eslint-plugin-no-jquery` does all it
does and is actually the maintained fork of it.
- Tested all affected `dependencies`
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>