Forms are dependent on models and therefore should be in services.
This PR also removes the old auth. aliasing
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* make repo as "pending transfer" if on transfer start doer has no right to create repo in new destination
* if new pending transfer ocured, create UI & Mail notifications
Use [chi](https://github.com/go-chi/chi) instead of the forked [macaron](https://gitea.com/macaron/macaron). Since macaron and chi have conflicts with session share, this big PR becomes a have-to thing. According my previous idea, we can replace macaron step by step but I'm wrong. :( Below is a list of big changes on this PR.
- [x] Define `context.ResponseWriter` interface with an implementation `context.Response`.
- [x] Use chi instead of macaron, and also a customize `Route` to wrap chi so that the router usage is similar as before.
- [x] Create different routers for `web`, `api`, `internal` and `install` so that the codes will be more clear and no magic .
- [x] Use https://github.com/unrolled/render instead of macaron's internal render
- [x] Use https://github.com/NYTimes/gziphandler instead of https://gitea.com/macaron/gzip
- [x] Use https://gitea.com/go-chi/session which is a modified version of https://gitea.com/macaron/session and removed `nodb` support since it will not be maintained. **BREAK**
- [x] Use https://gitea.com/go-chi/captcha which is a modified version of https://gitea.com/macaron/captcha
- [x] Use https://gitea.com/go-chi/cache which is a modified version of https://gitea.com/macaron/cache
- [x] Use https://gitea.com/go-chi/binding which is a modified version of https://gitea.com/macaron/binding
- [x] Use https://github.com/go-chi/cors instead of https://gitea.com/macaron/cors
- [x] Dropped https://gitea.com/macaron/i18n and make a new one in `code.gitea.io/gitea/modules/translation`
- [x] Move validation form structs from `code.gitea.io/gitea/modules/auth` to `code.gitea.io/gitea/modules/forms` to avoid dependency cycle.
- [x] Removed macaron log service because it's not need any more. **BREAK**
- [x] All form structs have to be get by `web.GetForm(ctx)` in the route function but not as a function parameter on routes definition.
- [x] Move Git HTTP protocol implementation to use routers directly.
- [x] Fix the problem that chi routes don't support trailing slash but macaron did.
- [x] `/api/v1/swagger` now will be redirect to `/api/swagger` but not render directly so that `APIContext` will not create a html render.
Notices:
- Chi router don't support request with trailing slash
- Integration test `TestUserHeatmap` maybe mysql version related. It's failed on my macOS(mysql 5.7.29 installed via brew) but succeed on CI.
Co-authored-by: 6543 <6543@obermui.de>
* Added TrN for repository limit
* Removed form.reach_limit_of_creation_0
* disable Create Button if user can not create
Co-authored-by: 6543 <6543@obermui.de>
* Make archival asynchronous
The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.
This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.
Fixes#11265
* Archive links: drop initial delay to three-quarters of a second
Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly. Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.
* archiver: restructure a little bit to facilitate testing
This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.
The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.
* gofmt nit: no space around binary + operator
* services: archiver: appease golangci-lint, lock queueMutex
Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.
* archiver: tests: fix several timing nits
Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.
* archiver: tests: no underscore in var name, ungh
* archiver: tests: Test* is run in a separate context than TestMain
We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.
* archiver: tests: hopefully final tweak
Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.
* repo: Download: restore some semblance of previous behavior
When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.
This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.
* archiver: tests: simplify a bit further
We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.
else if isn't really necessary if the conditions are simple enough and lead
to the same result.
* archiver: tests: resolve potential source of flakiness
Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.
While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.
* archiver: setup infrastructure for notifying consumers of completion
This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.
* repo: archive: make GET endpoint synchronous again
If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.
* archiver: tests: amend test to include WaitForCompletion()
This is a trivial one, so go ahead and include it.
* archiver: tests: fix test by calling NewContext()
The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.
* archiver: tests: integrate new WaitForCompletion a little better
We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.
* archiver: tests: combine numQueued declaration with next-instruction assignment
* routers: repo: reap unused archiving flag from DownloadStatus()
This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.
* services: archiver: restructure to use a channel
We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout
In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.
* services: archiver: use defer to unlock now that we can
This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.
* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"
This reverts commit bcc5214023.
Revert "archiver: tests: integrate new WaitForCompletion a little better"
This reverts commit 9fc8bedb56.
Revert "archiver: tests: fix test by calling NewContext()"
This reverts commit 709c35685e.
Revert "archiver: tests: amend test to include WaitForCompletion()"
This reverts commit 75261f56bc.
* archiver: tests: first attempt at WaitForCompletion() tests
* archiver: tests: slight improvement, less busy-loop
Just wait for the requests to complete in order, instead of busy-waiting
with a timeout. This is slightly less fragile.
While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.
* archiver: address lint nits
* services: archiver: only close the channel once
* services: archiver: use a struct{} for the wait channel
This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.
* archiver: tests: fix expectations
Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.
The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.
* archiver: tests: set cchan to nil for comparison
* archiver: move ctx.Error's back into the route handlers
We shouldn't be setting this in a service, we should just be validating the
request that we were handed.
* services: archiver: use regex to match a hash
This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.
* routers: repo: remove the weird /archive/status endpoint
We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"
* archiver: tests: bump reasonable timeout to 15s
* archiver: tests: actually release timedReq
* archiver: tests: run through inFlight instead of manually checking
While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.
* initArchiveLinks: prevent default behavior from clicking
* archiver: alias gitea's context, golang context import pending
* archiver: simplify logic, just reconstruct slices
While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.
* archiver: don't block shutdown on waiting for archive
The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.
The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.
* archiver: simplify shutdown logic
We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.
* Style issues
* Fix mis-merge
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Store task errors following migrations and display them
When migrate tasks fail store the error in the task table
and ensure that they show on the status page.
Fix#13242
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update web_src/js/index.js
* Hide the failed first
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add configurable Trust Models
Gitea's default signature verification model differs from GitHub. GitHub
uses signatures to verify that the committer is who they say they are -
meaning that when GitHub makes a signed commit it must be the committer.
The GitHub model prevents re-publishing of commits after revocation of a
key and prevents re-signing of other people's commits to create a
completely trusted repository signed by one key or a set of trusted
keys.
The default behaviour of Gitea in contrast is to always display the
avatar and information related to a signature. This allows signatures to
be decoupled from the committer. That being said, allowing arbitary
users to present other peoples commits as theirs is not necessarily
desired therefore we have a trust model whereby signatures from
collaborators are marked trusted, signatures matching the commit line
are marked untrusted and signatures that match a user in the db but not
the committer line are marked unmatched.
The problem with this model is that this conflicts with Github therefore
we need to provide an option to allow users to choose the Github model
should they wish to.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Adjust locale strings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Co-authored-by: 6543 <6543@obermui.de>
* Update models/gpg_key.go
* Add migration for repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
if check one user's unit in different repos, it's not necessary to
get user data every time.
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Set the context for CreateArchive to that of the request to ensure that archives
are only built for as long as a request is requesting them
Fix#11551
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Allow site admin to disable mirrors
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* No need to run through Safe
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Clarify only disabling NEW mirrors
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Apply suggestions from @guillep2k
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix creation of Org repos
Fix go-gitea#9269
* Change variable name to appease linter
* Update PR with suggestions
Add a note for user.CanCreateRepo() about failure assumptions
Change repo.create help message
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Option to set default branch at repository creation
* Handle template repos with non-default master branch
* Add DefaultBranch handling on creation to API
Fix#9542
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle if two or more attachments have the same name
* previously only the first could be downloaded - now each is downloadable
* dos also take care of #6506 (fix was: #6512)
* use func DownloadURL() at issue attatchments too
* Add team permission setting to allow creating repo in organization.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add test case for creating repo when have team creation access.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* build error: should omit comparison to bool constant
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add comment on exported functions
* Fix fixture consistency, fix existing unit tests
* Fix boolean comparison in xorm query.
* addCollaborator and changeCollaborationAccessMode separate steps
More clear to use different if-cases.
* Create and commit xorm session
* fix
* Add information of create repo permission in team sidebar
* Add migration step
* Clarify that repository creator will be administrator.
* Fix some things after merge
* Fix language text that use html
* migrations file
* Create repository permission -> Create repositories
* fix merge
* fix review comments
* Move some repositories' operations to a standalone service package
* improve code
* remove unused codes
* add rollback when fork failed
* add repo when return
* Add optional label sets on repo creation
* Fix CRLF
* Instead of hardcoding default, make it the helper
* Move label set init out of repo init
Add a new error for the router
Combine router label init with repo creation label init
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Add issue labels to Swagger for repo creation
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Update models/issue_label.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Update models/issue_label.go
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Panic don't fatal on create new logger
Fixes#5854
Signed-off-by: Andrew Thornton <art27@cantab.net>
* partial broken
* Update the logging infrastrcture
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Reset the skip levels for Fatal and Error
Signed-off-by: Andrew Thornton <art27@cantab.net>
* broken ncsa
* More log.Error fixes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove nal
* set log-levels to lowercase
* Make console_test test all levels
* switch to lowercased levels
* OK now working
* Fix vetting issues
* Fix lint
* Fix tests
* change default logging to match current gitea
* Improve log testing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* reset error skip levels to 0
* Update documentation and access logger configuration
* Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE
* Fix broken level caching
* Refactor the router log
* Add Router logger
* Add colorizing options
* Adjust router colors
* Only create logger if they will be used
* update app.ini.sample
* rename Attribute ColorAttribute
* Change from white to green for function
* Set fatal/error levels
* Restore initial trace logger
* Fix Trace arguments in modules/auth/auth.go
* Properly handle XORMLogger
* Improve admin/config page
* fix fmt
* Add auto-compression of old logs
* Update error log levels
* Remove the unnecessary skip argument from Error, Fatal and Critical
* Add stacktrace support
* Fix tests
* Remove x/sync from vendors?
* Add stderr option to console logger
* Use filepath.ToSlash to protect against Windows in tests
* Remove prefixed underscores from names in colors.go
* Remove not implemented database logger
This was removed from Gogs on 4 Mar 2016 but left in the configuration
since then.
* Ensure that log paths are relative to ROOT_PATH
* use path.Join
* rename jsonConfig to logConfig
* Rename "config" to "jsonConfig" to make it clearer
* Requested changes
* Requested changes: XormLogger
* Try to color the windows terminal
If successful default to colorizing the console logs
* fixup
* Colorize initially too
* update vendor
* Colorize logs on default and remove if this is not a colorizing logger
* Fix documentation
* fix test
* Use go-isatty to detect if on windows we are on msys or cygwin
* Fix spelling mistake
* Add missing vendors
* More changes
* Rationalise the ANSI writer protection
* Adjust colors on advice from @0x5c
* Make Flags a comma separated list
* Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING
* Ensure matching is done on the non-colored message - to simpify EXPRESSION
* Make URL scheme unambiguous
Redirect old routes to new routes
* Fix redirects to new URL scheme, and update template
* Fix branches/_new endpoints, and update integration test
