Unfortunately the fallback configuration code for [mailer] that were
added in #18982 are incorrect. When you read a value from an ini section
that key is added. This leads to a failure of the fallback mechanism.
Further there is also a spelling mistake in the startTLS configuration.
This PR restructures the mailer code to first map the deprecated
settings on to the new ones - and then use ini.MapTo to map those on to
the struct with additional validation as necessary.
Ref #21744
Signed-off-by: Andrew Thornton <art27@cantab.net>
Enable this to require captcha validation for user login. You also must
enable `ENABLE_CAPTCHA`.
Summary:
- Consolidate CAPTCHA template
- add CAPTCHA handle and context
- add `REQUIRE_CAPTCHA_FOR_LOGIN` config and docs
- Consolidate CAPTCHA set-up and verification code
Partially resolved#6049
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
My pull request changes the logging documentation that is visible here:
https://docs.gitea.io/en-us/logging-configuration/
The reason behind the changes is that for some time I've found the
logging documentation confusing, and wanted to give a try at making it
more clear.
---
If you find the existing changes to be ok, please don't merge yet, as I
have further ideas which I want to discuss with you before making the
changes.
### Swap the "Log Groups" and "Log outputs" sections.
I want to move the "Log outputs" section before the "Log Groups"
section. The reason is that the "Log Groups" section refers to ini
sections that are only later explained, and to concepts that are general
and should be documented in "Log outputs" or a different section.
This change is essentially a swap of the "Log Groups" and "Log outputs"
sections. That way the doumentation would follow the structure in which
the ini file is built: first explaining the outer sections, and then the
inner ones ([log], [log.name], [log.name.default], ...)
### Explain the workings of ambigous settings below the settings listing
Right now the basics of a setting is shown later than the explanation of
its special workings, for example with `FILE_NAME` at [the file output
mode](https://docs.gitea.io/en-us/logging-configuration/#file-mode)
(well, if the first changes are taken into account).
Currently I have `TODO` witten at 2 settings, which I have to figure out
how do they exactly work before I can document them.
### New section about [log]
New section after "Collecting Logs for Help" about how the top level
[log] itself works and what can go there.
Currently, variables that directly go into [log] are noted throughout
the whole document.
---
Please let me know what you think about the changes.
A counterargument that I myself see is that some of this is already
present in the cheatsheet, but I think it would be better to have [this
document](https://docs.gitea.io/en-us/logging-configuration/) as a
throrough explanation of how logging is configured, and the cheatsheet
would only have a short outline of the possible sections and variables.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This patch provide a mechanism to disable RSS/Atom feed.
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
## Changes proposed in [referenced issue 21845][1]
- Expand PAM configuration description with working examples.
- Clarify `STATIC_URL_PREFIX` use (include "assets" and only works after
database has been initialized)
- Add note for HTTPS proxy support VIA Apache.
[1]: https://github.com/go-gitea/gitea/issues/21845
This PR enhances the CORS middleware usage by allowing for the headers
to be configured in `app.ini`.
Fixes#21746
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Attempt clarify the AppWorkPath in the documentation by using different
notation and adding a section to the start of the cheat sheet.
Fix#21523
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Related #20471
This PR adds global quota limits for the package registry. Settings for
individual users/orgs can be added in a seperate PR using the settings
table.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
_This is a different approach to #20267, I took the liberty of adapting
some parts, see below_
## Context
In some cases, a weebhook endpoint requires some kind of authentication.
The usual way is by sending a static `Authorization` header, with a
given token. For instance:
- Matrix expects a `Bearer <token>` (already implemented, by storing the
header cleartext in the metadata - which is buggy on retry #19872)
- TeamCity #18667
- Gitea instances #20267
- SourceHut https://man.sr.ht/graphql.md#authentication-strategies (this
is my actual personal need :)
## Proposed solution
Add a dedicated encrypt column to the webhook table (instead of storing
it as meta as proposed in #20267), so that it gets available for all
present and future hook types (especially the custom ones #19307).
This would also solve the buggy matrix retry #19872.
As a first step, I would recommend focusing on the backend logic and
improve the frontend at a later stage. For now the UI is a simple
`Authorization` field (which could be later customized with `Bearer` and
`Basic` switches):
The header name is hard-coded, since I couldn't fine any usecase
justifying otherwise.
## Questions
- What do you think of this approach? @justusbunsi @Gusted @silverwind
- ~~How are the migrations generated? Do I have to manually create a new
file, or is there a command for that?~~
- ~~I started adding it to the API: should I complete it or should I
drop it? (I don't know how much the API is actually used)~~
## Done as well:
- add a migration for the existing matrix webhooks and remove the
`Authorization` logic there
_Closes #19872_
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: delvh <dev.lh@web.de>
This patch:
- Rename some files( `.md` to `.en-us.md`), fix missed translation copy
- Update link which shoud be refer to `../hacking-on-gitea/` instead of
`../make/` (outdated)
- Update `_redirects`:
- redirect `/{zh-cn|fr-fr}/make/` to `../hacking-on-gitea/`
- redirect `/zh-cn/third-party-tools/` to `/zh-cn/integrations/`
- Delete duplicated/outdated files.
- Update menu `weight` of developers.zh-cn.md
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
This patch provide a mechanism to disable
[sitemap](https://github.com/go-gitea/gitea/pull/18407).
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: 6543 <6543@obermui.de>
Fix file reference at the FLAGS line at the Log subsections heading,
improve COLORIZE line wording.
The FLAGS line referenced a file that doesn't exist in the repository as
of now. The COLORIZE line's wording implied that it would
unconditionally colorize the log by default.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The OAuth spec [defines two types of
client](https://datatracker.ietf.org/doc/html/rfc6749#section-2.1),
confidential and public. Previously Gitea assumed all clients to be
confidential.
> OAuth defines two client types, based on their ability to authenticate
securely with the authorization server (i.e., ability to
> maintain the confidentiality of their client credentials):
>
> confidential
> Clients capable of maintaining the confidentiality of their
credentials (e.g., client implemented on a secure server with
> restricted access to the client credentials), or capable of secure
client authentication using other means.
>
> **public
> Clients incapable of maintaining the confidentiality of their
credentials (e.g., clients executing on the device used by the resource
owner, such as an installed native application or a web browser-based
application), and incapable of secure client authentication via any
other means.**
>
> The client type designation is based on the authorization server's
definition of secure authentication and its acceptable exposure levels
of client credentials. The authorization server SHOULD NOT make
assumptions about the client type.
https://datatracker.ietf.org/doc/html/rfc8252#section-8.4
> Authorization servers MUST record the client type in the client
registration details in order to identify and process requests
accordingly.
Require PKCE for public clients:
https://datatracker.ietf.org/doc/html/rfc8252#section-8.1
> Authorization servers SHOULD reject authorization requests from native
apps that don't use PKCE by returning an error message
Fixes#21299
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Updates the Config Cheat Sheet for the `ALLWAYS` option in Camo proxy.
- Clarifies the behavior for true (both HTTP and HTTPS is proxied) vs
false (only HTTP is proxied)
- Minor grammar and typo improvements
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Since adding an aliases block doesn't seem to work locally for me (I
suspect because a page actually exists and Hugo is granting preference
to existing pages over aliases), I also added entries to
static/_redirects file so Netlify will handle the redirects
Fixes#7208
Only load SECRET_KEY and INTERNAL_TOKEN if they exist.
Never write the config file if the keys do not exist, which was only a fallback for Gitea upgraded from < 1.5
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Close#20098, in the NPM registry API, implemented to match what's described by https://github.com/npm/registry/blob/master/docs/REGISTRY-API.md#get-v1search
Currently have only implemented the bare minimum to work with the [Unity Package Manager](https://docs.unity3d.com/Manual/upm-ui.html).
Co-authored-by: Jack Vine <jackv@jack-lemur-suse.cat-prometheus.ts.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds mathematical rendering with KaTeX.
The first step is to add a Goldmark extension that detects the latex
(and tex) mathematics delimiters.
The second step to make this extension only run if math support is
enabled.
The second step is to then add KaTeX CSS and JS to the head which will
load after the dom is rendered.
Fix#3445
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- Update Chinese translation from comparison.en-us.md
<!--
Please check the following:
1. Make sure you are targeting the `main` branch, pull requests on
release branches are only allowed for bug fixes.
2. Read contributing guidelines:
https://github.com/go-gitea/gitea/blob/main/CONTRIBUTING.md
3. Describe what your pull request does and which issue you're targeting
(if any)
-->
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Follow #20987, update docs issue-pull-request-templates.zh-cn.md
<!--
Please check the following:
1. Make sure you are targeting the `main` branch, pull requests on
release branches are only allowed for bug fixes.
2. Read contributing guidelines:
https://github.com/go-gitea/gitea/blob/main/CONTRIBUTING.md
3. Describe what your pull request does and which issue you're targeting
(if any)
-->
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* feat: extend issue template for yaml
* feat: support yaml template
* feat: render form to markdown
* feat: support yaml template for pr
* chore: rename to Fields
* feat: template unmarshal
* feat: split template
* feat: render to markdown
* feat: use full name as template file name
* chore: remove useless file
* feat: use dropdown of fomantic ui
* feat: update input style
* docs: more comments
* fix: render text without render
* chore: fix lint error
* fix: support use description as about in markdown
* fix: add field class in form
* chore: generate swagger
* feat: validate template
* feat: support is_nummber and regex
* test: fix broken unit tests
* fix: ignore empty body of md template
* fix: make multiple easymde editors work in one page
* feat: better UI
* fix: js error in pr form
* chore: generate swagger
* feat: support regex validation
* chore: generate swagger
* fix: refresh each markdown editor
* chore: give up required validation
* fix: correct issue template candidates
* fix: correct checkboxes style
* chore: ignore .hugo_build.lock in docs
* docs: separate out a new doc for merge templates
* docs: introduce syntax of yaml template
* feat: show a alert for invalid templates
* test: add case for a valid template
* fix: correct attributes of required checkbox
* fix: add class not-under-easymde for dropzone
* fix: use more back-quotes
* chore: remove translation in zh-CN
* fix EasyMDE statusbar margin
* fix: remove repeated blocks
* fix: reuse regex for quotes
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Adds a new option to only show relevant repo's on the explore page, for bigger Gitea instances like Codeberg this is a nice option to enable to make the explore page more populated with unique and "high" quality repo's. A note is shown that the results are filtered and have the possibility to see the unfiltered results.
Co-authored-by: vednoc <vednoc@protonmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
This PR adds functionality to allow Gitea to sit behind an
HAProxy and HAProxy protocolled connections directly.
Fix#7508
Signed-off-by: Andrew Thornton <art27@cantab.net>
This adds support for getting the user's full name from the reverse
proxy in addition to username and email.
Tested locally with caddy serving as reverse proxy with Tailscale
authentication.
Signed-off-by: Will Norris <will@tailscale.com>
Signed-off-by: Will Norris <will@tailscale.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add SAML SP integration
Add current SAML 2.0 Service Provider (SP) status. RhodeCode EE supports SAML, CE does not.
Included issue links for both Gitea and Gogs, as corporate users will likely be interested in the status of both.
* Add SAML SP status to comparison for other translations
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Add documentation about pagination of the API
* Update docs/content/doc/developers/api-usage.en-us.md
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Added support for Pub packages.
* Update docs/content/doc/packages/overview.en-us.md
Co-authored-by: Gergely Nagy <algernon@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Gergely Nagy <algernon@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* increase default page sizes to 20
* adjust docs to reflect that the setting is used all over the place
* fix tests
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* `PROTOCOL`: can be smtp, smtps, smtp+startls, smtp+unix, sendmail, dummy
* `SMTP_ADDR`: domain for SMTP, or path to unix socket
* `SMTP_PORT`: port for SMTP; defaults to 25 for `smtp`, 465 for `smtps`, and 587 for `smtp+startls`
* `ENABLE_HELO`, `HELO_HOSTNAME`: reverse `DISABLE_HELO` to `ENABLE_HELO`; default to false + system hostname
* `FORCE_TRUST_SERVER_CERT`: replace the unclear `SKIP_VERIFY`
* `CLIENT_CERT_FILE`, `CLIENT_KEY_FILE`, `USE_CLIENT_CERT`: clarify client certificates here
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR proposes a minor improvement to the docs which allows a user to paste a single command into their terminal and get the needed tokens and keys.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
There are existing packages out there whose version do not conform to SemVer, yet, one would like to have them available in a generic package repository. To this end, remove the SemVer restriction on package versions when using the Generic package registry, and replace it with a check that simply makes sure the version isn't empty.
Signed-off-by: Gergely Nagy <me@gergo.csillger.hu>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: 6543 <6543@obermui.de>
Without this, it was rendering on the site like: "sh snap install gitea", instead of: "snap install gitea"
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Add hint for GNUPGHOME environment variable
With #19732, the default location for the `.gnupg` folder has changed. To mitigate this breaking change, users can specify the home directory for gnupg via `$GNUPGHOME` environment variable to keep using their current location.
* Update docs/content/doc/advanced/signing.en-us.md
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Add git.HOME_PATH
* add legacy file check
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* pass env GNUPGHOME to git command, move the existing .gitconfig to new home, make the fix for 1.17rc more clear.
* set git.HOME_PATH for docker images to default HOME
* Revert "set git.HOME_PATH for docker images to default HOME"
This reverts commit f120101ddc.
* force Gitea to use a stable GNUPGHOME directory
* extra check to ensure only process dir or symlink for legacy files
* refactor variable name
* The legacy dir check (for 1.17-rc1) could be removed with 1.18 release, since users should have upgraded from 1.17-rc to 1.17-stable
* Update modules/git/git.go
Co-authored-by: Steven Kriegler <61625851+justusbunsi@users.noreply.github.com>
* remove initFixGitHome117rc
* Update git.go
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Steven Kriegler <61625851+justusbunsi@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Unfortunately it appears that 2048 bit RSA keys can occasionally be created in such
a way that they appear to have 2047 bit length. This PR simply changes our defaults to
allow these.
Fix#20249
Signed-off-by: Andrew Thornton <art27@cantab.net>
- Completely remove U2F support from 1.18.0, 1.17.0 will be the last
release that U2F is somewhat supported. Users who used U2F would already
be warned about using U2F for a while now and should hopefully already
be migrated. But starting 1.18 definitely remove it.
* Update permissions.en-us.md
A few grammar tweaks to make docs a bit more clear.
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Update docs/content/doc/usage/permissions.en-us.md
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
* go.mod: add go-fed/{httpsig,activity/pub,activity/streams} dependency
go get github.com/go-fed/activity/streams@master
go get github.com/go-fed/activity/pub@master
go get github.com/go-fed/httpsig@master
* activitypub: implement /api/v1/activitypub/user/{username} (#14186)
Return informations regarding a Person (as defined in ActivityStreams
https://www.w3.org/TR/activitystreams-vocabulary/#dfn-person).
Refs: https://github.com/go-gitea/gitea/issues/14186
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: add the public key to Person (#14186)
Refs: https://github.com/go-gitea/gitea/issues/14186
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: go-fed conformant Clock instance
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: signing http client
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: implement the ReqSignature middleware
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: hack_16834
Signed-off-by: Loïc Dachary <loic@dachary.org>
* Fix CI checks-backend errors with go mod tidy
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Change 2021 to 2022, properly format package imports
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Run make fmt and make generate-swagger
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Use Gitea JSON library, add assert for pkp
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Run make fmt again, fix err var redeclaration
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Remove LogSQL from ActivityPub person test
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Assert if json.Unmarshal succeeds
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Cleanup, handle invalid usernames for ActivityPub person GET request
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Rename hack_16834 to user_settings
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Use the httplib module instead of http for GET requests
* Clean up whitespace with make fmt
* Use time.RFC1123 and make the http.Client proxy-aware
* Check if digest algo is supported in setting module
* Clean up some variable declarations
* Remove unneeded copy
* Use system timezone instead of setting.DefaultUILocation
* Use named constant for httpsigExpirationTime
* Make pubKey IRI #main-key instead of /#main-key
* Move /#main-key to #main-key in tests
* Implemented Webfinger endpoint.
* Add visible check.
* Add user profile as alias.
* Add actor IRI and remote interaction URL to WebFinger response
* fmt
* Fix lint errors
* Use go-ap instead of go-fed
* Run go mod tidy to fix missing modules in go.mod and go.sum
* make fmt
* Convert remaining code to go-ap
* Clean up go.sum
* Fix JSON unmarshall error
* Fix CI errors by adding @context to Person() and making sure types match
* Correctly decode JSON in api_activitypub_person_test.go
* Force CI rerun
* Fix TestActivityPubPersonInbox segfault
* Fix lint error
* Use @mariusor's suggestions for idiomatic go-ap usage
* Correctly add inbox/outbox IRIs to person
* Code cleanup
* Remove another LogSQL from ActivityPub person test
* Move httpsig algos slice to an init() function
* Add actor IRI and remote interaction URL to WebFinger response
* Update TestWebFinger to check for ActivityPub IRI in aliases
* make fmt
* Force CI rerun
* WebFinger: Add CORS header and fix Href -> Template for remote interactions
The CORS header is needed due to https://datatracker.ietf.org/doc/html/rfc7033#section-5 and fixes some Peertube <-> Gitea federation issues
* make lint-backend
* Make sure Person endpoint has Content-Type application/activity+json and includes PreferredUsername, URL, and Icon
Setting the correct Content-Type is essential for federating with Mastodon
* Use UTC instead of GMT
* Rename pkey to pubKey
* Make sure HTTP request Date in GMT
* make fmt
* dont drop err
* Make sure API responses always refer to username in original case
Copied from what I wrote on #19133 discussion: Handling username case is a very tricky issue and I've already encountered a Mastodon <-> Gitea federation bug due to Gitea considering Ta180m and ta180m to be the same user while Mastodon thinks they are two different users. I think the best way forward is for Gitea to only use the original case version of the username for federation so other AP software don't get confused.
* Move httpsig algs constant slice to modules/setting/federation.go
* Add new federation settings to app.example.ini and config-cheat-sheet
* Return if marshalling error
* Make sure Person IRIs are generated correctly
This commit ensures that if the setting.AppURL is something like "http://127.0.0.1:42567" (like in the integration tests), a trailing slash will be added after that URL.
* If httpsig verification fails, fix Host header and try again
This fixes a very rare bug when Gitea and another AP server (confirmed to happen with Mastodon) are running on the same machine, Gitea fails to verify incoming HTTP signatures. This is because the other AP server creates the sig with the public Gitea domain as the Host. However, when Gitea receives the request, the Host header is instead localhost, so the signature verification fails. Manually changing the host header to the correct value and trying the veification again fixes the bug.
* Revert "If httpsig verification fails, fix Host header and try again"
This reverts commit f53e46c721.
The bug was actually caused by nginx messing up the Host header when reverse-proxying since I didn't have the line `proxy_set_header Host $host;` in my nginx config for Gitea.
* Go back to using ap.IRI to generate inbox and outbox IRIs
* use const for key values
* Update routers/web/webfinger.go
* Use ctx.JSON in Person response to make code cleaner
* Revert "Use ctx.JSON in Person response to make code cleaner"
This doesn't work because the ctx.JSON() function already sends the response out and it's too late to edit the headers.
This reverts commit 95aad98897.
* Use activitypub.ActivityStreamsContentType for Person response Content Type
* Limit maximum ActivityPub request and response sizes to a configurable setting
* Move setting key constants to models/user/setting_keys.go
* Fix failing ActivityPubPerson integration test by checking the correct field for username
* Add a warning about changing settings that can break federation
* Add better comments
* Don't multiply Federation.MaxSize by 1<<20 twice
* Add more better comments
* Fix failing ActivityPubMissingPerson test
We now use ctx.ContextUser so the message printed out when a user does not exist is slightly different
* make generate-swagger
For some reason I didn't realize that /templates/swagger/v1_json.tmpl was machine-generated by make generate-swagger... I've been editing it by hand for three months! 🤦
* Move getting the RFC 2616 time to a separate function
* More code cleanup
* Update go-ap to fix empty liked collection and removed unneeded HTTP headers
* go mod tidy
* Add ed25519 to httpsig algorithms
* Use go-ap/jsonld to add @context and marshal JSON
* Change Gitea user agent from the default to Gitea/Version
* Use ctx.ServerError and remove all remote interaction code from webfinger.go
* clean git support for ver < 2.0
* fine tune tests for markup (which requires git module)
* remove unnecessary comments
* try to fix tests
* try test again
* use const for GitVersionRequired instead of var
* try to fix integration test
* Refactor CheckAttributeReader to make a *git.Repository version
* update document for commit signing with Gitea's internal gitconfig
* update document for commit signing with Gitea's internal gitconfig
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Allow render HTML with css/js external links
* Fix bug because of filename escape chars
* Fix lint
* Update docs about new configuration item
* Fix bug of render HTML in sub directory
* Add CSP head for displaying iframe in rendering file
* Fix test
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Some improvements
* some improvement
* revert change in SanitizerDisabled of external renderer
* Add sandbox for iframe and support allow-scripts and allow-same-origin
* refactor
* fix
* fix lint
* fine tune
* use single option RENDER_CONTENT_MODE, use sandbox=allow-scripts
* fine tune CSP
* Apply suggestions from code review
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Use Golang 1.18 (as minimal requirement) for Gitea 1.17 release, make sure the Golang version is still actively supported during Gitea 1.17 lifecycle.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
* docs: update the ROOT documentation and error messages
* The documentation now reflects what happens in the
setting/repository.go::newRepository function:
filepath.Join(AppWorkPath, RepoRootPath) was missing.
* The error message displayed when RepoRootPath is not found now
displays the value of RepoRootPath. Given the complexity of the
construction of this value, only referring to it in the abstract
is likely to be misleading to the Gitea admin trying to interpret
the message.
Co-authored-by: delvh <dev.lh@web.de>
The issue was that only the actual title was converted to uppercase, but
not the prefix as specified in `WORK_IN_PROGRESS_PREFIXES`. As a result,
the following did not work:
WORK_IN_PROGRESS_PREFIXES=Draft:,[Draft],WIP:,[WIP]
One possible workaround was:
WORK_IN_PROGRESS_PREFIXES=DRAFT:,[DRAFT],WIP:,[WIP]
Then indeed one could use `Draft` (as well as `DRAFT`) in the title.
However, the link `Start the title with DRAFT: to prevent the pull request
from being merged accidentally.` showed the suggestion in uppercase; so
it is not possible to show it as `Draft`. This PR fixes it, and allows
to use `Draft` in `WORK_IN_PROGRESS_PREFIXES`.
Fixes#19779.
Co-authored-by: zeripath <art27@cantab.net>
* Changed the filename of the favicon SVG
This allows the user to have a favicon which differs from the logo.
* Added favicon.svg
This is needed to accommodate the changes for allowing the user to have a differing logo and favicon
* Adjusted page to accommodate what icon is used as favicon
* Added functionality to also generate the favicon.svg via generate-images.js
* Adjusted the description for the new favicon compatibility
Co-authored-by: silverwind <me@silverwind.io>
* Updated generate-images.js to generate favicons from a separate favicons.svg file
This belongs to PR #18542.
* Added description on how custom favicons can be generated
* Replaced space indents with tabs
* Synced changes with current state of the file
* Synced changes with current state of the file
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* chore: add health check endpoint
docs: update document about health check
fix: fix up Sqlite3 ping. current ping will success even if the db file is missing
fix: do not expose privacy information in output field
* refactor: remove HealthChecker struct
* Added `/api/healthz` to install routes.
This was needed for using /api/healthz endpoint in Docker healthchecks,
otherwise, Docker would never become healthy if using healthz endpoint
and users would not be able to complete the installation of Gitea.
* Update modules/cache/cache.go
* fine tune
* Remove unnecessary test code. Now there are 2 routes for installation (and maybe more in future)
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Marcos de Oliveira <marcossantos@furb.br>
- Add this option to the debugging problems section. So users that are
trying to debug SSH-related problems will get the errors logged from `cmd/serv.go`
Remove two unmaintained vendor packages `i18n` and `paginater`. Changes:
* Rewrite `i18n` package with a more clear fallback mechanism. Fix an unstable `Tr` behavior, add more tests.
* Refactor the legacy `Paginater` to `Paginator`, test cases are kept unchanged.
Trivial enhancement (no breaking for end users):
* Use the first locale in LANGS setting option as the default, add a log to prevent from surprising users.
* Improve package registry docs
* move new content down
* add hint re upload a package
* wording, formatting
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Continues on from #19202.
Following the addition of pprof labels we can now more easily understand the relationship between a goroutine and the requests that spawn them.
This PR takes advantage of the labels and adds a few others, then provides a mechanism for the monitoring page to query the pprof goroutine profile.
The binary profile that results from this profile is immediately piped in to the google library for parsing this and then stack traces are formed for the goroutines.
If the goroutine is within a context or has been created from a goroutine within a process context it will acquire the process description labels for that process.
The goroutines are mapped with there associate pids and any that do not have an associated pid are placed in a group at the bottom as unbound.
In this way we should be able to more easily examine goroutines that have been stuck.
A manager command `gitea manager processes` is also provided that can export the processes (with or without stacktraces) to the command line.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Change all cron tasks to make them no notice on success default. Instead if a user
wants notices on success they need to add NOTICE_ON_SUCCESS=true instead.
## ⚠️ BREAKING ⚠️
This changes the cron config so that notices on success are no longer set by default
and breaks NO_SUCCESS_NOTICE settings. Instead users who want notices on success
must set NOTICE_ON_SUCCESS=true instead.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update custom/conf/app.example.ini
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
* Enhance container selection in docker dump
The problem with the previous query was, that it sometimes selected multiple containers, which make the command file with a hard to understand message. Now, use '^...$' to make sure a regex full match.
Even with #17688 email addresses that contain an initial `-` may still be present in the db and it may in future still be possible to imagine a situation whereby initial `-` are repermitted.
This PR simply updates the documentation to warn users to set their SENDMAIL_ARGS with a terminal `--` to prevent this possibility email addresses being interpreted as options.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use go1.18 to build gitea& update min go version to 1.17
* bump in a few more places
* add a few simple tests for isipprivate
* update go.mod
* update URL to https://go.dev/dl/
* golangci-lint
* attempt golangci-lint workaround
* change version
* bump fumpt version
* skip strings.title test
* go mod tidy
* update tests as some aren't private??
* update tests
This ensures the tools only run in the versions we've tested and it also
does not polute PATH with those tools so they are truly isolated. This
syntax of `go run` requires go 1.17, so the minimum version is set
accordingly.
Fixes: https://github.com/go-gitea/gitea/issues/18867
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Update the webauthn_credential_id_sequence in Postgres
There is (yet) another problem with v210 in that Postgres will silently allow preset
ID insertions ... but it will not update the sequence value.
This PR simply adds a little step to the end of the v210 migration to update the
sequence number.
Users who have already migrated who find that they cannot insert new
webauthn_credentials into the DB can either run:
```bash
gitea doctor recreate-table webauthn_credential
```
or
```bash
./gitea doctor --run=check-db-consistency --fix
```
which will fix the bad sequence.
Fix#19012
Signed-off-by: Andrew Thornton <art27@cantab.net>
The service worker causes a lot of issues with JS errors after instance
upgrades while not bringing any real performance gain over regular HTTP
caching.
Disable it by default for this reason. Maybe later we can remove it
completely, as I simply see no benefit in having it.
- Use a better and more curated list of Ciphers and KeyExchanges, these roughly follows OpenSSH's default.
- Remove some cryptography values which were deprecated.
Adds an upgrade script that automates upgrading installations on Linux from binary releases, so people don't need to reinvent the wheel. Hopefully this leads to less questions about how to upgrade, and consequently less Gitea instances running unmaintained versions in the wild.
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Make docker gitea/gitea:v1.16-dev etc refer to the latest build on that branch
One of the problems with our current docker tagging is that although we
have strict version tags, latest and dev we do not have a way for docker
users to track the current release branch. This PR simply suggests that
we use the 1.x-dev tag for these and we build and push these. This will
give users who want or need unreleased bug fixes the option of tracking
the pre-release version instead of simply jumping to dev.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Frontport #18468
Frontport changelog for 1.16, frontport 1.15.11 changelog and update config.yaml
## [1.16.0](https://github.com/go-gitea/gitea/releases/tag/v1.16.0) - 2022-01-30
* BREAKING
* Remove golang vendored directory (#18277)
* Paginate releases page & set default page size to 10 (#16857)
* Only allow webhook to send requests to allowed hosts (#17482)
* SECURITY
* Disable content sniffing on `PlainTextBytes` (#18359) (#18365)
* Only view milestones from current repo (#18414) (#18417)
* Sanitize user-input on file name (#17666)
* Use `hostmatcher` to replace `matchlist` to improve blocking of bad hosts in Webhooks (#17605)
* FEATURES
* Add/update SMTP auth providers via cli (#18197)
* Support webauthn (#17957)
* Team permission allow different unit has different permission (#17811)
* Implement Well-Known URL for password change (#17777)
* Add support for ssh commit signing (#17743)
* Allow Loading of Diffs that are too large (#17739)
* Add copy button to markdown code blocks (#17638)
* Add .gitattribute assisted language detection to blame, diff and render (#17590)
* Add `PULL_LIMIT` and `PUSH_LIMIT` to cron.update_mirror task (#17568)
* Add Reindex buttons to repository settings page (#17494)
* Make SSL cipher suite configurable (#17440)
* Add groups scope/claim to OIDC/OAuth2 Provider (#17367)
* Add simple update checker to Gitea (#17212)
* Migrated Repository will show modifications when possible (#17191)
* Create pub/priv keypair for federation (#17071)
* Make LDAP be able to skip local 2FA (#16954)
* Add nodeinfo endpoint for federation purposes (#16953)
* Save and view issue/comment content history (#16909)
* Use git attributes to determine generated and vendored status for language stats and diffs (#16773)
* Add migrate from Codebase (#16768)
* Add migration from GitBucket (#16767)
* Add OAuth2 introspection endpoint (#16752)
* Add proxy settings and support for migration and webhook (#16704)
* Add microsoft oauth2 providers (#16544)
* Send registration email on user autoregistration (#16523)
* Defer Last Commit Info (#16467)
* Support unprotected file patterns (#16395)
* Add migrate from OneDev (#16356)
* Add option to update pull request by `rebase` (#16125)
* Add RSS/Atom feed support for user actions (#16002)
* Add support for corporate WeChat webhooks (#15910)
* Add a simple way to rename branch like gh (#15870)
* Add bundle download for repository (#14538)
* Add agit flow support in gitea (#14295)
* API
* Add MirrorUpdated field to Repository API type (#18267)
* Adjust Fork API to allow setting a custom repository name (#18066)
* Add API to manage repo tranfers (#17963)
* Add API to get file commit history (#17652)
* Add API to get issue/pull comments and events (timeline) (#17403)
* Add API to get/edit wiki (#17278)
* Add API for get user org permissions (#17232)
* Add HTML urls to notification API (#17178)
* Add API to get commit diff/patch (#17095)
* Respond with updated notifications in API (#17064)
* Add API to fetch git notes (#16649)
* Generalize list header for API (#16551)
* Add API Token Cache (#16547)
* Allow Token API calls be authorized using the reverse-proxy header (#15119)
* ENHANCEMENTS
* Make the height of the editor in Review Box smaller (4 lines as GitHub) (#18319)
* Return nicer error if trying to pull from non-existent user (#18288)
* Show pull link for agit pull request also (#18235)
* Enable partial clone by default (#18195)
* Added replay of webhooks (#18191)
* Show OAuth callback error message (#18185)
* Increase Salt randomness (#18179)
* Add MP4 as default allowed attachment type (#18170)
* Include folders into size cost (#18158)
* Remove `/email2user` endpoint (#18127)
* Handle invalid issues (#18111)
* Load EasyMDE/CodeMirror dynamically, remove RequireEasyMDE (#18069)
* Support open compare page directly (#17975)
* Prefer "Hiragino Kaku Gothic ProN" in system-ui-ja (#17954)
* Clean legacy SimpleMDE code (#17926)
* Refactor install page (db type) (#17919)
* Improve interface when comparing a branch which has created a pull request (#17911)
* Allow default branch to be inferred on compare page (#17908)
* Display issue/comment role even if repo archived (#17907)
* Always set a message-id on mails (#17900)
* Change `<a>` elements to underline on hover (#17898)
* Render issue references in file table (#17897)
* Handle relative unix socket paths (#17836)
* Move accessmode into models/perm (#17828)
* Fix some org style problems (#17807)
* Add List-Unsubscribe header (#17804)
* Create menus for organization pages (#17802)
* Switch archive URL code back to href attributes (#17796)
* Refactor "refs/*" string usage by using constants (#17784)
* Allow forks to org if you can create repos (#17783)
* Improve install code to avoid low-level mistakes. (#17779)
* Improve ellipsis buttons (#17773)
* Add restrict and no-user-rc to authorized_keys (#17772)
* Add copy Commit ID button in commits list (#17759)
* Make `bind` error more readable (#17750)
* Fix navbar on project view (#17749)
* More pleasantly handle broken or missing git repositories (#17747)
* Use `*PushUpdateOptions` as receiver (#17724)
* Remove unused `user` paramater (#17723)
* Better builtin avatar generator (#17707)
* Cleanup and use global style on popups (#17674)
* Move user/org deletion to services (#17673)
* Added comment for changing issue ref (#17672)
* Allow admins to change user avatars (#17661)
* Only set `data-path` once for each file in diff pages (#17657)
* Add icon to vscode clone link (#17641)
* Add download button for file viewer (#17640)
* Add pagination to fork list (#17639)
* Use a standalone struct name for Organization (#17632)
* Minor readability patch. (#17627)
* Add context support for GetUserByID (#17602)
* Move merge-section to `> .content` (#17582)
* Remove NewSession method from db.Engine interface (#17577)
* Move unit into models/unit/ (#17576)
* Restrict GetDeletedBranchByID to the repositories deleted branches (#17570)
* Refactor commentTags functionality (#17558)
* Make Repo Code Indexer an Unique Queue (#17515)
* Simplify Gothic to use our session store instead of creating a different store (#17507)
* Add settings to allow different SMTP envelope from address (#17479)
* Properly determine CSV delimiter (#17459)
* Hide label comments if labels were added and removed immediately (#17455)
* Tune UI alignment for nav bar notification icon, avatar image, issue label (#17438)
* Add appearance section in settings (#17433)
* Move key forms before list and add cancel button (#17432)
* When copying executables to the docker chmod them (#17423)
* Remove deprecated `extendDefaultPlugins` method of svgo (#17399)
* Fix the click behavior for <tr> and <td> with [data-href] (#17388)
* Refactor update checker to use AppState (#17387)
* Improve async/await usage, and sort init calls in `index.js` (#17386)
* Use a variable but a function for IsProd because of a slight performance increment (#17368)
* Frontend refactor, PascalCase to camelCase, remove unused code (#17365)
* Hide command line merge instructions when user can't push (#17339)
* Move session to models/login (#17338)
* Sync gitea app path for git hooks and authorized keys when starting (#17335)
* Make the Mirror Queue a queue (#17326)
* Add "Copy branch name" button to pull request page (#17323)
* Fix repository summary on mobile (#17322)
* Split `index.js` to separate files (#17315)
* Show direct match on top for user search (#17303)
* Frontend refactor: move Vue related code from `index.js` to `components` dir, and remove unused codes. (#17301)
* Upgrade chi to v5 (#17298)
* Disable form autofill (#17291)
* Improve behavior of "Fork" button (#17288)
* Open markdown image links in new window (#17287)
* Add hints for special Wiki pages (#17283)
* Move add deploy key form before the list and add a cancel button (#17228)
* Allow adding multiple issues to a project (#17226)
* Add metrics to get issues by repository (#17225)
* Add specific event type to header (#17222)
* Redirect on project after issue created (#17211)
* Reference in new issue modal: dont pre-populate issue title (#17208)
* Always set a unique Message-ID header (#17206)
* Add projects and project boards in exposed metrics (#17202)
* Add metrics to get issues by label (#17201)
* Add protection to disable Gitea when run as root (#17168)
* Don't return binary file changes in raw PR diffs by default (#17158)
* Support sorting for project board issuses (#17152)
* Force color-adjust for markdown checkboxes (#17146)
* Add option to copy line permalink (#17145)
* Move twofactor to models/login (#17143)
* Multiple tokens support for migrating from github (#17134)
* Unify issue and PR subtitles (#17133)
* Make Requests Processes and create process hierarchy. Associate OpenRepository with context. (#17125)
* Fix problem when database id is not increment as expected (#17124)
* Avatar refactor, move avatar code from `models` to `models.avatars`, remove duplicated code (#17123)
* Re-allow clipboard copy on non-https sites (#17118)
* DBContext is just a Context (#17100)
* Move login related structs and functions to models/login (#17093)
* Add SkipLocal2FA option to pam and smtp sources (#17078)
* Move db related basic functions to models/db (#17075)
* Fixes username tagging in "Reference in new issue" (#17074)
* Use light/dark theme based on system preference (#17051)
* Always emit the configuration path (#17036)
* Add `AbsoluteListOptions` (#17028)
* Use common sessioner for API and Web (#17027)
* Fix overflow label in small view (#17020)
* Report the associated filter if there is an error in LDAP (#17014)
* Add "new issue" btn on project (#17001)
* Add doctor dbconsistency check for release and attachment (#16978)
* Disable Fomantic's CSS tooltips (#16974)
* Add Cache-Control to avatar redirects (#16973)
* Make mirror feature more configurable (#16957)
* Add skip and limit to git.GetTags (#16897)
* Remove ParseQueueConnStr as it is unused (#16878)
* Remove unused Fomantic sidebar module (#16853)
* Allow LDAP Sources to provide Avatars (#16851)
* Remove Dashboard/Home button from the navbar (#16844)
* Use conditions but not repo ids as query condition (#16839)
* Add user settings key/value DB table (#16834)
* Add buttons to allow loading of incomplete diffs (#16829)
* Add information for migrate failure (#16803)
* Add EdDSA JWT signing algorithm (#16786)
* Add user status filter to admin user management page (#16770)
* Add Option to synchronize Admin & Restricted states from OIDC/OAuth2 along with Setting Scopes (#16766)
* Do not use thin scrollbars on Firefox (#16738)
* Download LFS in git and web workflow from minio/s3 directly (SERVE_DIRECT) (#16731)
* Compute proper foreground color for labels (#16729)
* Add edit button to wiki sidebar and footer (#16719)
* Fix migration svg color (#16715)
* Add link to vscode to repo header (#16664)
* Add filter by owner and team to issue/pulls search endpoint (#16662)
* Kanban colored boards (#16647)
* Allow setting X-FRAME-OPTIONS (#16643)
* Separate open and closed issue in metrics (#16637)
* Support direct comparison (git diff a..b) as well merge comparison (a…b) (#16635)
* Add setting to OAuth handlers to skip local 2FA authentication (#16594)
* Make PR merge options more intuitive (#16582)
* Show correct text when comparing commits on empty pull request (#16569)
* Pre-fill suggested New File 'name' and 'content' with Query Params (#16556)
* Add an abstract json layout to make it's easier to change json library (#16528)
* Make Mermaid.js limit configurable (#16519)
* Improve 2FA autofill (#16473)
* Add modals to Organization and Team remove/leave (#16471)
* Show tag name on dashboard items list (#16466)
* Change default cron schedules from @every 24h to @midnight (#16431)
* Prevent double sanitize (#16386)
* Replace `list.List` with slices (#16311)
* Add configuration option to restrict users by default (#16256)
* Move login out of models (#16199)
* Support pagination of organizations on user settings pages (#16083)
* Switch migration icon to svg (#15954)
* Add left padding for chunk header of split diff view (#13397)
* Allow U2F 2FA without TOTP (#11573)
* BUGFIXES
* GitLab reviews may not have the updated_at field set (#18450) (#18461)
* Fix detection of no commits when the default branch is not master (#18422) (#18423)
* Fix broken oauth2 authentication source edit page (#18412) (#18419)
* Place inline diff comment dialogs on split diff in 4th and 8th columns (#18403) (#18404)
* Fix restore without topic failure (#18387) (#18400)
* Fix commit's time (#18375) (#18392)
* Fix partial cloning a repo (#18373) (#18377)
* Stop trimming preceding and suffixing spaces from editor filenames (#18334)
* Prevent showing webauthn error for every time visiting `/user/settings/security` (#18386)
* Fix mime-type detection for HTTP server (#18370) (#18371)
* Stop trimming preceding and suffixing spaces from editor filenames (#18334)
* Restore propagation of ErrDependenciesLeft (#18325)
* Fix PR comments UI (#18323)
* Use indirect comparison when showing pull requests (#18313)
* Replace satori/go.uuid with gofrs/uuid (#18311)
* Fix commit links on compare page (#18310)
* Don't show double error response in git hook (#18292)
* Handle missing default branch better in owner/repo/branches page (#18290)
* Fix CheckRepoStats and reuse it during migration (#18264)
* Prevent underline hover on cards (#18259)
* Don't delete branch if other PRs with this branch are open (#18164)
* Require codereview to have content (#18156)
* Allow admin to associate missing LFS objects for repositories (#18143)
* When attempting to subscribe other user to issue report why access denied (#18091)
* Add option to convert CRLF to LF line endings for sendmail (#18075)
* Only create pprof files for gitea serv if explicitly asked for (#18068)
* Abort merge if head has been updated before pressing merge (#18032)
* Improve TestPatch to use git read-tree -m and implement git-merge-one-file functionality (#18004)
* Use JSON module instead of stdlib json (#18003)
* Fixed issue merged/closed wording (#17973)
* Return nicer error for ForcePrivate (#17971)
* Fix overflow in commit graph (#17947)
* Prevent services/mailer/mailer_test.go tests from deleteing data directory (#17941)
* Use disable_form_autofill on Codebase and Gitbucket (#17936)
* Fix a panic in NotifyCreateIssueComment (caused by string truncation) (#17928)
* Fix markdown URL parsing (#17924)
* Apply CSS Variables to all message elements (#17920)
* Improve checkBranchName (#17901)
* Update chi/middleware to chi/v5/middleware (#17888)
* Fix position of label color picker colors (#17866)
* Fix ListUnadoptedRepositories incorrect total count (#17865)
* Remove whitespace inside rendered code `<td>` (#17859)
* Make Co-committed-by and co-authored-by trailers optional (#17848)
* Fix value of User.IsRestricted when oauth2 user registration (#17839)
* Use new OneDev /milestones endpoint (#17782)
* Prevent deadlock in TestPersistableChannelQueue (#17717)
* Simplify code for writing SHA to name-rev (#17696)
* Fix database deadlock when update issue labels (#17649)
* Add warning for BIDI characters in page renders and in diffs (#17562)
* Fix ipv6 parsing for builtin ssh server (#17561)
* Multiple Escaping Improvements (#17551)
* Fixes#16559 - Do not trim leading spaces for tab delimited (#17442)
* Show client-side error if wiki page is empty (#17415)
* Fix context popup error (#17398)
* Stop sanitizing full name in API (#17396)
* Fix issue close/comment buttons on mobile (#17317)
* Fix navbar UI (#17235)
* Fix problem when database id is not increment as expected (#17229)
* Open the DingTalk link in browser (#17084)
* Remove heads pointing to missing old refs (#17076)
* Fix commit status index problem (#17061)
* Handle broken references in mirror sync (#17013)
* Fix for create repo page layout (#17012)
* Improve LDAP synchronization efficiency (#16994)
* Add repo_id for attachment (#16958)
* Clean-up HookPreReceive and restore functionality for pushing non-standard refs (#16705)
* Remove duplicate csv import in modules/csv/csv.go (#16631)
* Improve SMTP authentication and Fix user creation bugs (#16612)
* Fixed emoji alias not parsed in links (#16221)
* Calculate label URL on API (#16186)
* TRANSLATION
* Fix mispelling of starred as stared (#17465)
* Re-separate the color translation strings (#17390)
* Enable Malayalam, Greek, Persian, Hungarian & Indonesian by default (#16998)
* BUILD
* Add lockfile-check (#18285)
* Don't store assets modified time into generated files (#18193)
* Use shadowing script for docker (#17846)
* MISC
* Update JS dependencies (#17611)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Switch to non-deprecation setting
(Avoid by-default: "Deprecated fallback `[server]` `LFS_CONTENT_PATH` present. Use `[lfs]` `PATH` instead. This fallback will be removed in v1.18.0")
* Update all references
Make router logger more friendly, show the related function name/file/line.
[BREAKING]
This PR substantially changes the logging format of the router logger. If you use this logging for monitoring e.g. fail2ban you will need to update this to match the new format.
In the case of misuse or misunderstanding from a developer whereby,
if `sel` can receive user-controlled data, jQuery `$(sel)` can lead to the
creation of a new element. Current usage is using hard-coded selectors
in the templates, but nobody prevents that from expanding to
user-controlled somehow.
