Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
- Push commits updates are run in a queue and updates can come from less
traceable places such as Git over SSH, therefor add more information
about on which repository the pushUpdate failed.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1723
(cherry picked from commit 37ab9460394800678d2208fed718e719d7a5d96f)
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Say to the binding middleware which locale should be used for the
required error.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1683
(cherry picked from commit 5a2d7966127b5639332038e9925d858ab54fc360)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Changed behavior to calculate package quota limit using package `creator
ID` instead of `owner ID`.
Currently, users are allowed to create an unlimited number of
organizations, each of which has its own package limit quota, resulting
in the ability for users to have unlimited package space in different
organization scopes. This fix will calculate package quota based on
`package version creator ID` instead of `package version owner ID`
(which might be organization), so that users are not allowed to take
more space than configured package settings.
Also, there is a side case in which users can publish packages to a
specific package version, initially published by different user, taking
that user package size quota. Version in fix should be better because
the total amount of space is limited to the quota for users sharing the
same organization scope.
Fixes https://codeberg.org/forgejo/forgejo/issues/1458
Some mails such as issue creation mails are missing the reply-to-comment
address. This PR fixes that and specifies which comment types should get
a reply-possibility.
Fixes#27819
We have support for two factor logins with the normal web login and with
basic auth. For basic auth the two factor check was implemented at three
different places and you need to know that this check is necessary. This
PR moves the check into the basic auth itself.
- On user deletion, delete action runners that the user has created.
- Add a database consistency check to remove action runners that have
nonexistent belonging owner.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1720
(cherry picked from commit 009ca7223dab054f7f760b7ccae69e745eebfabb)
Co-authored-by: Gusted <postmaster@gusted.xyz>
The steps to reproduce it.
First, create a new oauth2 source.
Then, a user login with this oauth2 source.
Disable the oauth2 source.
Visit users -> settings -> security, 500 will be displayed.
This is because this page only load active Oauth2 sources but not all
Oauth2 sources.
After many refactoring PRs for the "locale" and "template context
function", now the ".locale" is not needed for web templates any more.
This PR does a clean up for:
1. Remove `ctx.Data["locale"]` for web context.
2. Use `ctx.Locale` in `500.tmpl`, for consistency.
3. Add a test check for `500 page` locale usage.
4. Remove the `Str2html` and `DotEscape` from mail template context
data, they are copy&paste errors introduced by #19169 and #16200 . These
functions are template functions (provided by the common renderer), but
not template data variables.
5. Make email `SendAsync` function mockable (I was planning to add more
tests but it would make this PR much too complex, so the tests could be
done in another PR)
Due to a bug in the GitLab API, the diff_refs field is populated in the
response when fetching an individual merge request, but not when
fetching a list of them. That field is used to populate the merge base
commit SHA.
While there is detection for the merge base even when not populated by
the downloader, that detection is not flawless. Specifically, when a
GitLab merge request has a single commit, and gets merged with the
squash strategy, the base branch will be fast-forwarded instead of a
separate squash or merge commit being created. The merge base detection
attempts to find the last commit on the base branch that is also on the
PR branch, but in the fast-forward case that is the PR's only commit.
Assuming the head commit is also the merge base results in the import of
a PR with 0 commits and no diff.
This PR uses the individual merge request endpoint to fetch merge
request data with the diff_refs field. With its data, the base merge
commit can be properly set, which—by not relying on the detection
mentioned above—correctly imports PRs that were "merged" by
fast-forwarding the base branch.
ref: https://gitlab.com/gitlab-org/gitlab/-/issues/29620
Before this PR, the PR migration code populates Gitea's MergedCommitID
field by using GitLab's merge_commit_sha field. However, that field is
only populated when the PR was merged using a merge strategy. When a
squash strategy is used, squash_commit_sha is populated instead.
Given that Gitea does not keep track of merge and squash commits
separately, this PR simply populates Gitea's MergedCommitID by using
whichever field is present in the GitLab API response.
Hello there,
Cargo Index over HTTP is now prefered over git for package updates: we
should not force users who do not need the GIT repo to have the repo
created/updated on each publish (it can still be created in the packages
settings).
The current behavior when publishing is to check if the repo exist and
create it on the fly if not, then update it's content.
Cargo HTTP Index does not rely on the repo itself so this will be
useless for everyone not using the git protocol for cargo registry.
This PR only disable the creation on the fly of the repo when publishing
a crate.
This is linked to #26844 (error 500 when trying to publish a crate if
user is missing write access to the repo) because it's now optional.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
When `webhook.PROXY_URL` has been set, the old code will check if the
proxy host is in `ALLOWED_HOST_LIST` or reject requests through the
proxy. It requires users to add the proxy host to `ALLOWED_HOST_LIST`.
However, it actually allows all requests to any port on the host, when
the proxy host is probably an internal address.
But things may be even worse. `ALLOWED_HOST_LIST` doesn't really work
when requests are sent to the allowed proxy, and the proxy could forward
them to any hosts.
This PR fixes it by:
- If the proxy has been set, always allow connectioins to the host and
port.
- Check `ALLOWED_HOST_LIST` before forwarding.
Closes#27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
- Currently in the cron tasks, the 'Previous Time' only displays the
previous time of when the cron library executes the function, but not
any of the manual executions of the task.
- Store the last run's time in memory in the Task struct and use that,
when that time is later than time that the cron library has executed
this task.
- This ensures that if an instance admin manually starts a task, there's
feedback that this task is/has been run, because the task might be run
that quick, that the status icon already has been changed to an
checkmark,
- Tasks that are executed at startup now reflect this as well, as the
time of the execution of that task on startup is now being shown as
'Previous Time'.
- Added integration tests for the API part, which is easier to test
because querying the HTML table of cron tasks is non-trivial.
- Resolves https://codeberg.org/forgejo/forgejo/issues/949
(cherry picked from commit fd34fdac1408ece6b7d9fe6a76501ed9a45d06fa)
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: silverwind <me@silverwind.io>
This pull request is a minor code cleanup.
From the Go specification (https://go.dev/ref/spec#For_range):
> "1. For a nil slice, the number of iterations is 0."
> "3. If the map is nil, the number of iterations is 0."
`len` returns 0 if the slice or map is nil
(https://pkg.go.dev/builtin#len). Therefore, checking `len(v) > 0`
before a loop is unnecessary.
---
At the time of writing this pull request, there wasn't a lint rule that
catches these issues. The closest I could find is
https://staticcheck.dev/docs/checks/#S103
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
With this PR we added the possibility to configure the Actions timeouts
values for killing tasks/jobs.
Particularly this enhancement is closely related to the `act_runner`
configuration reported below:
```
# The timeout for a job to be finished.
# Please note that the Gitea instance also has a timeout (3h by default) for the job.
# So the job could be stopped by the Gitea instance if it's timeout is shorter than this.
timeout: 3h
```
---
Setting the corresponding key in the INI configuration file, it is
possible to let jobs run for more than 3 hours.
Signed-off-by: Francesco Antognazza <francesco.antognazza@gmail.com>
- There's no need for `In` to be used, as it's a single parameter that's
being passed.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1521
(cherry picked from commit 4a4955f43ae7fc50cfe3b48409a0a10c82625a19)
Co-authored-by: Gusted <postmaster@gusted.xyz>
When the user does not set a username lookup condition, LDAP will get an
empty string `""` for the user, hence the following code
```
if isExist, err := user_model.IsUserExist(db.DefaultContext, 0, sr.Username)
```
The user presence determination will always be nonexistent, so updates
to user information will never be performed.
Fix#27049
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
Blank Issues should be enabled if they are not explicit disabled through
the `blank_issues_enabled` field of the Issue Config. The Implementation
has currently a Bug: If you create a Issue Config file with only
`contact_links` and without a `blank_issues_enabled` field,
`blank_issues_enabled` is set to false by default.
The fix is only one line, but I decided to also improve the tests to
make sure there are no other problems with the Implementation.
This is a bugfix, so it should be backported to 1.20.
This PR removed `unittest.MainTest` the second parameter
`TestOptions.GiteaRoot`. Now it detects the root directory by current
working directory.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
I noticed, that the push mirrors endpoint, is the only endpoint which
returns the times in long format rather than as time.Time().
I think the behavior should be consistent across the project.
----
## ⚠️ BREAKING ⚠️
This PR changes the time format used in API responses for all
push_mirror endpoints which return a push mirror.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Refs: https://codeberg.org/forgejo/forgejo/pulls/1385
Signed-off-by: Lars Lehtonen <lars.lehtonen@gmail.com>
(cherry picked from commit 589e7d346f51de4a0e2c461b220c8cad34133b2f)
Co-authored-by: Lars Lehtonen <lars.lehtonen@gmail.com>
This PR adds a new field `RemoteAddress` to both mirror types which
contains the sanitized remote address for easier (database) access to
that information. Will be used in the audit PR if merged.
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#26723
Add `ChangeDefaultBranch` to the `notifier` interface and implement it
in `indexerNotifier`. So when changing the default branch,
`indexerNotifier` sends a message to the `indexer queue` to update the
index.
---------
Co-authored-by: techknowlogick <matti@mdranta.net>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
Just like `models/unittest`, the testing helper functions should be in a
separate package: `contexttest`
And complete the TODO:
> // TODO: move this function to other packages, because it depends on
"models" package
Cargo registry-auth feature requires config.json to have a property
auth-required set to true in order to send token to all registry
requests.
This is ok for git index because you can manually edit the config.json
file to add the auth-required, but when using sparse
(setting index url to
"sparse+https://git.example.com/api/packages/{owner}/cargo/"), the
config.json is dynamically rendered, and does not reflect changes to the
config.json file in the repo.
I see two approaches:
- Serve the real config.json file when fetching the config.json on the
cargo service.
- Automatically detect if the registry requires authorization. (This is
what I implemented in this PR).
What the PR does:
- When a cargo index repository is created, on the config.json, set
auth-required to wether or not the repository is private.
- When the cargo/config.json endpoint is called, set auth-required to
wether or not the request was authorized using an API token.
The web context (modules/context.Context) is quite complex, it's
difficult for the callers to initialize correctly.
This PR introduces a `NewWebContext` function, to make sure the web
context have the same behavior for different cases.
- Resolves https://codeberg.org/forgejo/forgejo/issues/580
- Return a `upload_field` to any release API response, which points to
the API URL for uploading new assets.
- Adds unit test.
- Adds integration testing to verify URL is returned correctly and that
upload endpoint actually works
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Replace #22751
1. only support the default branch in the repository setting.
2. autoload schedule data from the schedule table after starting the
service.
3. support specific syntax like `@yearly`, `@monthly`, `@weekly`,
`@daily`, `@hourly`
## How to use
See the [GitHub Actions
document](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#schedule)
for getting more detailed information.
```yaml
on:
schedule:
- cron: '30 5 * * 1,3'
- cron: '30 5 * * 2,4'
jobs:
test_schedule:
runs-on: ubuntu-latest
steps:
- name: Not on Monday or Wednesday
if: github.event.schedule != '30 5 * * 1,3'
run: echo "This step will be skipped on Monday and Wednesday"
- name: Every time
run: echo "This step will always run"
```
Signed-off-by: Bo-Yi.Wu <appleboy.tw@gmail.com>
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- Add a new `CreateSecretOption` struct for creating secrets
- Implement a `CreateOrgSecret` function to create a secret in an
organization
- Add a new route in `api.go` to handle the creation of organization
secrets
- Update the Swagger template to include the new `CreateOrgSecret` API
endpoint
---------
Signed-off-by: appleboy <appleboy.tw@gmail.com>
## Archived labels
This adds the structure to allow for archived labels.
Archived labels are, just like closed milestones or projects, a medium to hide information without deleting it.
It is especially useful if there are outdated labels that should no longer be used without deleting the label entirely.
## Changes
1. UI and API have been equipped with the support to mark a label as archived
2. The time when a label has been archived will be stored in the DB
## Outsourced for the future
There's no special handling for archived labels at the moment.
This will be done in the future.
## Screenshots
Part of https://github.com/go-gitea/gitea/issues/25237
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#26129
Replace #26258
This PR will introduce a transaction on creating pull request so that if
some step failed, it will rollback totally. And there will be no dirty
pull request exist.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Until now expired package data gets deleted daily by a cronjob. The
admin page shows the size of all packages and the size of unreferenced
data. The users (#25035, #20631) expect the deletion of this data if
they run the cronjob from the admin page but the job only deletes data
older than 24h.
This PR adds a new button which deletes all expired data.
---------
Co-authored-by: silverwind <me@silverwind.io>
Follow #25229
Copy from
https://github.com/go-gitea/gitea/pull/26290#issuecomment-1663135186
The bug is that we cannot get changed files for the
`pull_request_target` event. This event runs in the context of the base
branch, so we won't get any changes if we call
`GetFilesChangedSinceCommit` with `PullRequest.Base.Ref`.
I noticed that `issue_service.CreateComment` adds transaction operations
on `issues_model.CreateComment`, we can merge the two functions and we
can avoid calling each other's methods in the `services` layer.
Co-authored-by: Giteabot <teabot@gitea.io>
- The user renaming function has zero test coverage.
- This patch brings that up to speed to test for various scenarios and
ensure that in a normal workflow the correct things has changed to their
respective new value. Most scenarios are to ensure certain things DO NOT
happen.
(cherry picked from commit 5b9d34ed115c9ef24012b8027959ea0afdcb4e2d)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1156
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Just to get 100% coverage on services/wiki/wiki_path.go, nothing
special. This is just an formality.
(cherry picked from commit 6b3528920fbf18c41d6aeb95498af48443282370)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1156
Co-authored-by: Gusted <postmaster@gusted.xyz>
In the original implementation, we can only get the first 30 records of
the commit status (the default paging size), if the commit status is
more than 30, it will lead to the bug #25990. I made the following two
changes.
- On the page, use the ` db.ListOptions{ListAll: true}` parameter
instead of `db.ListOptions{}`
- The `GetLatestCommitStatus` function makes a determination as to
whether or not a pager is being used.
fixed#25990
The API should only return the real Mail of a User, if the caller is
logged in. The check do to this don't work. This PR fixes this. This not
really a security issue, but can lead to Spam.
---------
Co-authored-by: silverwind <me@silverwind.io>
Attemp fix: #25744
Fixing the log level when we delete any repo then we get error hook not
found by id. That should be warn level to reduce the noise in the logs.
---------
Co-authored-by: delvh <dev.lh@web.de>
- The `NoBetterThan` function can only handle comparisons between
"pending," "success," "error," and "failure." For any other comparison,
we directly return false. This prevents logic errors like the one in
#26121.
- The callers of the `NoBetterThan` function should also avoid making
incomparable calls.
---------
Co-authored-by: yp05327 <576951401@qq.com>
Co-authored-by: puni9869 <80308335+puni9869@users.noreply.github.com>
This PR
- Fix#26093. Replace `time.Time` with `timeutil.TimeStamp`
- Fix#26135. Add missing `xorm:"extends"` to `CountLFSMetaObject` for
LFS meta object query
- Add a unit test for LFS meta object garbage collection
- cancel running jobs if the event is push
- Add a new function `CancelRunningJobs` to cancel all running jobs of a
run
- Update `FindRunOptions` struct to include `Ref` field and update its
condition in `toConds` function
- Implement auto cancellation of running jobs in the same workflow in
`notify` function
related task: https://github.com/go-gitea/gitea/pull/22751/
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Replace `github.com/gogs/cron` with `github.com/go-co-op/gocron` as the
former package is not maintained for many years.
---------
Co-authored-by: delvh <dev.lh@web.de>
To avoid deadlock problem, almost database related functions should be
have ctx as the first parameter.
This PR do a refactor for some of these functions.
The version listed in rpm repodata should only contain the rpm version
(1.0.0) and not the combination of version and release (1.0.0-2). We
correct this behaviour in primary.xml.gz, filelists.xml.gz and
others.xml.gz.
Signed-off-by: Peter Verraedt <peter@verraedt.be>
Fix#25776. Close#25826.
In the discussion of #25776, @wolfogre's suggestion was to remove the
commit status of `running` and `warning` to keep it consistent with
github.
references:
-
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#about-commit-statuses
## ⚠️ BREAKING ⚠️
So the commit status of Gitea will be consistent with GitHub, only
`pending`, `success`, `error` and `failure`, while `warning` and
`running` are not supported anymore.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Bumping `github.com/golang-jwt/jwt` from v4 to v5.
`github.com/golang-jwt/jwt` v5 is bringing some breaking changes:
- standard `Valid()` method on claims is removed. It's replaced by
`ClaimsValidator` interface implementing `Validator()` method instead,
which is called after standard validation. Gitea doesn't seem to be
using this logic.
- `jwt.Token` has a field `Valid`, so it's checked in `ParseToken`
function in `services/auth/source/oauth2/token.go`
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Before: the concept "Content string" is used everywhere. It has some
problems:
1. Sometimes it means "base64 encoded content", sometimes it means "raw
binary content"
2. It doesn't work with large files, eg: uploading a 1G LFS file would
make Gitea process OOM
This PR does the refactoring: use "ContentReader" / "ContentBase64"
instead of "Content"
This PR is not breaking because the key in API JSON is still "content":
`` ContentBase64 string `json:"content"` ``
Related issue: #18368
It doesn't seem right to "guess" the file encoding/BOM when using API to
upload files.
The API should save the uploaded content as-is.
we refactored `userIDFromToken` for the token parsing part into a new
function `parseToken`. `parseToken` returns the string `token` from
request, and a boolean `ok` representing whether the token exists or
not. So we can distinguish between token non-existence and token
inconsistency in the `verfity` function, thus solving the problem of no
proper error message when the token is inconsistent.
close#24439
related #22119
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Follow #25229
At present, when the trigger event is `pull_request_target`, the `ref`
and `sha` of `ActionRun` are set according to the base branch of the
pull request. This makes it impossible for us to find the head branch of
the `ActionRun` directly. In this PR, the `ref` and `sha` will always be
set to the head branch and they will be changed to the base branch when
generating the task context.
Remove unnecessary `if opts.Logger != nil` checks.
* For "CLI doctor" mode, output to the console's "logger.Info".
* For "Web Task" mode, output to the default "logger.Debug", to avoid
flooding the server's log in a busy production instance.
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes#24723
Direct serving of content aka HTTP redirect is not mentioned in any of
the package registry specs but lots of official registries do that so it
should be supported by the usual clients.
When branch's commit CommitMessage is too long, the column maybe too
short.(TEXT 16K for mysql).
This PR will fix it to only store the summary because these message will
only show on branch list or possible future search?
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fix#25451.
Bugfixes:
- When stopping the zombie or endless tasks, set `LogInStorage` to true
after transferring the file to storage. It was missing, it could write
to a nonexistent file in DBFS because `LogInStorage` was false.
- Always update `ActionTask.Updated` when there's a new state reported
by the runner, even if there's no change. This is to avoid the task
being judged as a zombie task.
Enhancement:
- Support `Stat()` for DBFS file.
- `WriteLogs` refuses to write if it could result in content holes.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#25088
This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
this will allow us to fully localize it later
PS: we can not migrate back as the old value was a one-way conversion
prepare for #25213
---
*Sponsored by Kithara Software GmbH*
In modern days, there is no reason to make users set "charset" anymore.
Close#25378
## ⚠️ BREAKING
The key `[database].CHARSET` was removed completely as every newer
(>10years) MySQL database supports `utf8mb4` already.
There is a (deliberately) undocumented new fallback option if anyone
still needs to use it, but we don't recommend using it as it simply
causes problems.
Fix#21072
Username Attribute is not a required item when creating an
authentication source. If Username Attribute is empty, the username
value of LDAP user cannot be read, so all users from LDAP will be marked
as inactive by mistake when synchronizing external users.
This PR improves the sync logic, if username is empty, the email address
will be used to find user.
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
close#24540
related:
- Protocol: https://gitea.com/gitea/actions-proto-def/pulls/9
- Runner side: https://gitea.com/gitea/act_runner/pulls/201
changes:
- Add column of `labels` to table `action_runner`, and combine the value
of `agent_labels` and `custom_labels` column to `labels` column.
- Store `labels` when registering `act_runner`.
- Update `labels` when `act_runner` starting and calling `Declare`.
- Users cannot modify the `custom labels` in edit page any more.
other changes:
- Store `version` when registering `act_runner`.
- If runner is latest version, parse version from `Declare`. But older
version runner still parse version from request header.
The plan is that all built-in auth providers use inline SVG for more
flexibility in styling and to get the GitHub icon to follow
`currentcolor`. This only removes the `public/img/auth` directory and
adds the missing svgs to our svg build.
It should map the built-in providers to these SVGs and render them. If
the user has set a Icon URL, it should render that as an `img` tag
instead.
```
gitea-azure-ad
gitea-bitbucket
gitea-discord
gitea-dropbox
gitea-facebook
gitea-gitea
gitea-gitlab
gitea-google
gitea-mastodon
gitea-microsoftonline
gitea-nextcloud
gitea-twitter
gitea-yandex
octicon-mark-github
```
GitHub logo is now white again on dark theme:
<img width="431" alt="Screenshot 2023-06-12 at 21 45 34"
src="https://github.com/go-gitea/gitea/assets/115237/27a43504-d60a-4132-a502-336b25883e4d">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Extract from #22743
`DeleteBranch` will trigger a push update event, so that
`pull_service.CloseBranchPulls` has been invoked twice and
`AddDeletedBranch` is better to be moved to push update then even user
delete a branch via git command, it will also be triggered.
Co-authored-by: Giteabot <teabot@gitea.io>
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
This PR creates an API endpoint for creating/updating/deleting multiple
files in one API call similar to the solution provided by
[GitLab](https://docs.gitlab.com/ee/api/commits.html#create-a-commit-with-multiple-files-and-actions).
To archive this, the CreateOrUpdateRepoFile and DeleteRepoFIle functions
in files service are unified into one function supporting multiple files
and actions.
Resolves#14619
Before there was a "graceful function": RunWithShutdownFns, it's mainly
for some modules which doesn't support context.
The old queue system doesn't work well with context, so the old queues
need it.
After the queue refactoring, the new queue works with context well, so,
use Golang context as much as possible, the `RunWithShutdownFns` could
be removed (replaced by RunWithCancel for context cancel mechanism), the
related code could be simplified.
This PR also fixes some legacy queue-init problems, eg:
* typo : archiver: "unable to create codes indexer queue" => "unable to
create repo-archive queue"
* no nil check for failed queues, which causes unfriendly panic
After this PR, many goroutines could have better display name:
This PR replaces all string refName as a type `git.RefName` to make the
code more maintainable.
Fix#15367
Replaces #23070
It also fixed a bug that tags are not sync because `git remote --prune
origin` will not remove local tags if remote removed.
We in fact should use `git fetch --prune --tags origin` but not `git
remote update origin` to do the sync.
Some answer from ChatGPT as ref.
> If the git fetch --prune --tags command is not working as expected,
there could be a few reasons why. Here are a few things to check:
>
>Make sure that you have the latest version of Git installed on your
system. You can check the version by running git --version in your
terminal. If you have an outdated version, try updating Git and see if
that resolves the issue.
>
>Check that your Git repository is properly configured to track the
remote repository's tags. You can check this by running git config
--get-all remote.origin.fetch and verifying that it includes
+refs/tags/*:refs/tags/*. If it does not, you can add it by running git
config --add remote.origin.fetch "+refs/tags/*:refs/tags/*".
>
>Verify that the tags you are trying to prune actually exist on the
remote repository. You can do this by running git ls-remote --tags
origin to list all the tags on the remote repository.
>
>Check if any local tags have been created that match the names of tags
on the remote repository. If so, these local tags may be preventing the
git fetch --prune --tags command from working properly. You can delete
local tags using the git tag -d command.
---------
Co-authored-by: delvh <dev.lh@web.de>
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
close https://github.com/go-gitea/gitea/issues/16321
Provided a webhook trigger for requesting someone to review the Pull
Request.
Some modifications have been made to the returned `PullRequestPayload`
based on the GitHub webhook settings, including:
- add a description of the current reviewer object as
`RequestedReviewer` .
- setting the action to either **review_requested** or
**review_request_removed** based on the operation.
- adding the `RequestedReviewers` field to the issues_model.PullRequest.
This field will be loaded into the PullRequest through
`LoadRequestedReviewers()` when `ToAPIPullRequest` is called.
After the Pull Request is merged, I will supplement the relevant
documentation.
Fix#24856
Rename "context.contextKey" to "context.WebContextKey", this context is
for web context only. But the Context itself is not renamed, otherwise
it would cause a lot of changes (if we really want to rename it, there
could be a separate PR).
The old test code doesn't really test, the "install page" gets broken
not only one time, so use new test code to make sure the "install page"
could work.
Use `default_merge_message/REBASE_TEMPLATE.md` for amending the message
of the last commit in the list of commits that was merged. Previously
this template was mentioned in the documentation but not actually used.
In this template additional variables `CommitTitle` and `CommitBody` are
available, for the title and body of the commit.
Ideally the message of every commit would be updated using the template,
but doing an interactive rebase or merging commits one by one is
complicated, so that is left as a future improvement.
Replace #20257 (which is stale and incomplete)
Close#20255
Major changes:
* Deprecate the "WHITELIST", use "ALLOWLIST"
* Add wildcard support for EMAIL_DOMAIN_ALLOWLIST/EMAIL_DOMAIN_BLOCKLIST
* Update example config file and document
* Improve tests
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close#12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR is a refactor at the beginning. And now it did 4 things.
- [x] Move renaming organizaiton and user logics into services layer and
merged as one function
- [x] Support rename a user capitalization only. For example, rename the
user from `Lunny` to `lunny`. We just need to change one table `user`
and others should not be touched.
- [x] Before this PR, some renaming were missed like `agit`
- [x] Fix bug the API reutrned from `http.StatusNoContent` to `http.StatusOK`
Replace #16455Close#21803
Mixing different Gitea contexts together causes some problems:
1. Unable to respond proper content when error occurs, eg: Web should
respond HTML while API should respond JSON
2. Unclear dependency, eg: it's unclear when Context is used in
APIContext, which fields should be initialized, which methods are
necessary.
To make things clear, this PR introduces a Base context, it only
provides basic Req/Resp/Data features.
This PR mainly moves code. There are still many legacy problems and
TODOs in code, leave unrelated changes to future PRs.
This PR
- [x] Move some functions from `issues.go` to `issue_stats.go` and
`issue_label.go`
- [x] Remove duplicated issue options `UserIssueStatsOption` to keep
only one `IssuesOptions`
This PR is to allow users to specify status checks by patterns. Users
can enter patterns in the "Status Check Pattern" `textarea` to match
status checks and each line specifies a pattern. If "Status Check" is
enabled, patterns cannot be empty and user must enter at least one
pattern.
Users will no longer be able to choose status checks from the table. But
a __*`Matched`*__ mark will be added to the matched checks to help users
enter patterns.
Benefits:
- Even if no status checks have been completed, users can specify
necessary status checks in advance.
- More flexible. Users can specify a series of status checks by one
pattern.
Before:
After:
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-author: @pboguslawski
"registration success email" is only used for notifying a user that "you
have a new account now" when the account is created by admin manually.
When a user uses external auth source, they already knows that they has
the account, so do not send such email.
Co-authored-by: Giteabot <teabot@gitea.io>
The `GetAllCommits` endpoint can be pretty slow, especially in repos
with a lot of commits. The issue is that it spends a lot of time
calculating information that may not be useful/needed by the user.
The `stat` param was previously added in #21337 to address this, by
allowing the user to disable the calculating stats for each commit. But
this has two issues:
1. The name `stat` is rather misleading, because disabling `stat`
disables the Stat **and** Files. This should be separated out into two
different params, because getting a list of affected files is much less
expensive than calculating the stats
2. There's still other costly information provided that the user may not
need, such as `Verification`
This PR, adds two parameters to the endpoint, `files` and `verification`
to allow the user to explicitly disable this information when listing
commits. The default behavior is true.
1. Remove unused fields/methods in web context.
2. Make callers call target function directly instead of the light
wrapper like "IsUserRepoReaderSpecific"
3. The "issue template" code shouldn't be put in the "modules/context"
package, so move them to the service package.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
Close#24213
Replace #23830
#### Cause
- Before, in order to making PR can get latest commit after reopening,
the `ref`(${REPO_PATH}/refs/pull/${PR_INDEX}/head) of evrey closed PR
will be updated when pushing commits to the `head branch` of the closed
PR.
#### Changes
- For closed PR , won't perform these behavior: insert`comment`, push
`notification` (UI and email), exectue
[pushToBaseRepo](7422503341/services/pull/pull.go (L409))
function and trigger `action` any more when pushing to the `head branch`
of the closed PR.
- Refresh the reference of the PR when reopening the closed PR (**even
if the head branch has been deleted before**). Make the reference of PR
consistent with the `head branch`.
The `..` should be covered by TestUserTitleToWebPath.
Otherwise, if the random string is "..", it causes unnecessary failure
in TestUserWebGitPathConsistency
Since the login form label for user_name unconditionally displays
`Username or Email Address` for the `user_name` field, bring matching
LDAP filters to more prominence in the documentation/placeholders.
Signed-off-by: Gary Moon <gary@garymoon.net>
Partially for #24457
Major changes:
1. The old `signedUserNameStringPointerKey` is quite hacky, use
`ctx.Data[SignedUser]` instead
2. Move duplicate code from `Contexter` to `CommonTemplateContextData`
3. Remove incorrect copying&pasting code `ctx.Data["Err_Password"] =
true` in API handlers
4. Use one unique `RenderPanicErrorPage` for panic error page rendering
5. Move `stripSlashesMiddleware` to be the first middleware
6. Install global panic recovery handler, it works for both `install`
and `web`
7. Make `500.tmpl` only depend minimal template functions/variables,
avoid triggering new panics
Screenshot:
<details>
</details>
Add ntlm authentication support for mail
use "github.com/Azure/go-ntlmssp"
---------
Co-authored-by: yangtan_win <YangTan@Fitsco.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: @awkwardbunny
This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.
---------
Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
There was only one `IsRepositoryExist` function, it did: `has && isDir`
However it's not right, and it would cause 500 error when creating a new
repository if the dir exists.
Then, it was changed to `has || isDir`, it is still incorrect, it
affects the "adopt repo" logic.
To make the logic clear:
* IsRepositoryModelOrDirExist
* IsRepositoryModelExist
Fix https://github.com/go-gitea/gitea/pull/24362/files#r1179095324
`getAuthenticatedMeta` has checked them, these code are duplicated one.
And the first invokation has a wrong permission check. `DownloadHandle`
should require read permission but not write.
> The scoped token PR just checked all API routes but in fact, some web
routes like `LFS`, git `HTTP`, container, and attachments supports basic
auth. This PR added scoped token check for them.
---------
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The Infinite Monkey Random Typing catches a bug, inconsistent wiki path
converting.
Close#24276
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
- Update all tool dependencies to latest tag
- Remove unused errcheck, it is part of golangci-lint
- Include main.go in air
- Enable wastedassign again now that it's
[generics-compatible](https://github.com/golangci/golangci-lint/pull/3689)
- Restructured lint targets to new `lint-*` namespace
Before, there was a `log/buffer.go`, but that design is not general, and
it introduces a lot of irrelevant `Content() (string, error) ` and
`return "", fmt.Errorf("not supported")` .
And the old `log/buffer.go` is difficult to use, developers have to
write a lot of `Contains` and `Sleep` code.
The new `LogChecker` is designed to be a general approach to help to
assert some messages appearing or not appearing in logs.
Close#24195
Some of the changes are taken from my another fix
f07b0de997
in #20147 (although that PR was discarded ....)
The bug is:
1. The old code doesn't handle `removedfile` event correctly
2. The old code doesn't provide attachments for type=CommentTypeReview
This PR doesn't intend to refactor the "upload" code to a perfect state
(to avoid making the review difficult), so some legacy styles are kept.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
