## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Replace #16455Close#21803
Mixing different Gitea contexts together causes some problems:
1. Unable to respond proper content when error occurs, eg: Web should
respond HTML while API should respond JSON
2. Unclear dependency, eg: it's unclear when Context is used in
APIContext, which fields should be initialized, which methods are
necessary.
To make things clear, this PR introduces a Base context, it only
provides basic Req/Resp/Data features.
This PR mainly moves code. There are still many legacy problems and
TODOs in code, leave unrelated changes to future PRs.
> The scoped token PR just checked all API routes but in fact, some web
routes like `LFS`, git `HTTP`, container, and attachments supports basic
auth. This PR added scoped token check for them.
---------
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
During the refactoring of the git module, I found there were some
strange operations. This PR tries to fix 2 of them
1. The empty argument `--` in repo_attribute.go, which was introduced by
#16773. It seems unnecessary because nothing else would be added later.
2. The complex git service logic in repo/http.go.
* Before: the `hasAccess` only allow `service == "upload-pack" ||
service == "receive-pack"`
* After: unrelated code is removed. No need to call ToTrustedCmdArgs
anymore.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR follows #21535 (and replace #22592)
## Review without space diff
https://github.com/go-gitea/gitea/pull/22678/files?diff=split&w=1
## Purpose of this PR
1. Make git module command completely safe (risky user inputs won't be
passed as argument option anymore)
2. Avoid low-level mistakes like
https://github.com/go-gitea/gitea/pull/22098#discussion_r1045234918
3. Remove deprecated and dirty `CmdArgCheck` function, hide the `CmdArg`
type
4. Simplify code when using git command
## The main idea of this PR
* Move the `git.CmdArg` to the `internal` package, then no other package
except `git` could use it. Then developers could never do
`AddArguments(git.CmdArg(userInput))` any more.
* Introduce `git.ToTrustedCmdArgs`, it's for user-provided and already
trusted arguments. It's only used in a few cases, for example: use git
arguments from config file, help unit test with some arguments.
* Introduce `AddOptionValues` and `AddOptionFormat`, they make code more
clear and simple:
* Before: `AddArguments("-m").AddDynamicArguments(message)`
* After: `AddOptionValues("-m", message)`
* -
* Before: `AddArguments(git.CmdArg(fmt.Sprintf("--author='%s <%s>'",
sig.Name, sig.Email)))`
* After: `AddOptionFormat("--author='%s <%s>'", sig.Name, sig.Email)`
## FAQ
### Why these changes were not done in #21535 ?
#21535 is mainly a search&replace, it did its best to not change too
much logic.
Making the framework better needs a lot of changes, so this separate PR
is needed as the second step.
### The naming of `AddOptionXxx`
According to git's manual, the `--xxx` part is called `option`.
### How can it guarantee that `internal.CmdArg` won't be not misused?
Go's specification guarantees that. Trying to access other package's
internal package causes compilation error.
And, `golangci-lint` also denies the git/internal package. Only the
`git/command.go` can use it carefully.
### There is still a `ToTrustedCmdArgs`, will it still allow developers
to make mistakes and pass untrusted arguments?
Generally speaking, no. Because when using `ToTrustedCmdArgs`, the code
will be very complex (see the changes for examples). Then developers and
reviewers can know that something might be unreasonable.
### Why there was a `CmdArgCheck` and why it's removed?
At the moment of #21535, to reduce unnecessary changes, `CmdArgCheck`
was introduced as a hacky patch. Now, almost all code could be written
as `cmd := NewCommand(); cmd.AddXxx(...)`, then there is no need for
`CmdArgCheck` anymore.
### Why many codes for `signArg == ""` is deleted?
Because in the old code, `signArg` could never be empty string, it's
either `-S[key-id]` or `--no-gpg-sign`. So the `signArg == ""` is just
dead code.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Change all license headers to comply with REUSE specification.
Fix#16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
This enables git.Command's Run to optionally use the given context directly so its deadline will be respected. Otherwise, it falls back to the previous behavior of using the supplied timeout or a default timeout value of 360 seconds.
repo's serviceRPC() calls now use the context's deadline (which is unset/unlimited) instead of the default 6-minute timeout. This means that large repo clones will no longer arbitrarily time out on the upload-pack step, and pushes can take longer than 6 minutes on the receive-pack step.
Fixes#20680
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Follows #19266, #8553, Close#18553, now there are only three `Run..(&RunOpts{})` functions.
* before: `stdout, err := RunInDir(path)`
* now: `stdout, _, err := RunStdString(&git.RunOpts{Dir:path})`
This follows
* https://github.com/go-gitea/gitea/issues/18553
Introduce `RunWithContextString` and `RunWithContextBytes` to help the refactoring. Add related unit tests. They keep the same behavior to save stderr into err.Error() as `RunInXxx` before.
Remove `RunInDirTimeoutPipeline` `RunInDirTimeoutFullPipeline` `RunInDirTimeout` `RunInDirTimeoutEnv` `RunInDirPipeline` `RunInDirFullPipeline` `RunTimeout`, `RunInDirTimeoutEnvPipeline`, `RunInDirTimeoutEnvFullPipeline`, `RunInDirTimeoutEnvFullPipelineFunc`.
Then remaining `RunInDir` `RunInDirBytes` `RunInDirWithEnv` can be easily refactored in next PR with a simple search & replace:
* before: `stdout, err := RunInDir(path)`
* next: `stdout, _, err := RunWithContextString(&git.RunContext{Dir:path})`
Other changes:
1. When `timeout <= 0`, use default. Because `timeout==0` is meaningless and could cause bugs. And now many functions becomes more simple, eg: `GitGcRepos` 9 lines to 1 line. `Fsck` 6 lines to 1 line.
2. Only set defaultCommandExecutionTimeout when the option `setting.Git.Timeout.Default > 0`
This PR adds a middleware which sets a ContextUser (like GetUserByParams before) in a single place which can be used by other methods. For routes which represent a repo or org the respective middlewares set the field too.
Also fix a bug in modules/context/org.go during refactoring.
* Remove `db.DefaultContext` usage in routers, use `ctx` directly
* Use `ctx` directly if there is one, remove some `db.DefaultContext` in `services`
* Use ctx instead of db.DefaultContext for `cmd` and some `modules` packages
* fix incorrect context usage
- Pass the Global command args into serviceRPC.
- Fixes error with partial cloning.
- Add partial clone test
- Include diff
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR continues the work in #17125 by progressively ensuring that git
commands run within the request context.
This now means that the if there is a git repo already open in the context it will be used instead of reopening it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Some refactors related repository model
* Move more methods out of repository
* Move repository into models/repo
* Fix test
* Fix test
* some improvements
* Remove unnecessary function
This PR registers requests with the process manager and manages hierarchy within the processes.
Git repos are then associated with a context, (usually the request's context) - with sub commands using this context as their base context.
Signed-off-by: Andrew Thornton <art27@cantab.net>
The io/ioutil package has been deprecated as of Go 1.16, see
https://golang.org/doc/go1.16#ioutil. This commit replaces the existing
io/ioutil functions with their new definitions in io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Followup from #16562 prepare for #16567
* Rename ctx.Form() to ctx.FormString()
* Reimplement FormX func to need less code and cpu cycles
* Move code into own file
* refactor routers directory
* move func used for web and api to common
* make corsHandler a function to prohibit side efects
* rm unused func
Co-authored-by: 6543 <6543@obermui.de>
