* Add option to provide signed token to verify key ownership
Currently we will only allow a key to be matched to a user if it matches
an activated email address. This PR provides a different mechanism - if
the user provides a signature for automatically generated token (based
on the timestamp, user creation time, user ID, username and primary
email.
* Ensure verified keys can act for all active emails for the user
* Add code to mark keys as verified
* Slight UI adjustments
* Slight UI adjustments 2
* Simplify signature verification slightly
* fix postgres test
* add api routes
* handle swapped primary-keys
* Verify the no-reply address for verified keys
* Only add email addresses that are activated to keys
* Fix committer shortcut properly
* Restructure gpg_keys.go
* Use common Verification Token code
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add checkbox to delete pull branch after successful merge
* Omit DeleteBranchAfterMerge field in json
* Log a warning instead of error when PR head branch deleted
* Add DefaultDeleteBranchAfterMerge to PullRequestConfig
* Add support for delete_branch_after_merge via API
* Fix for API: the branch should be deleted from the HEAD repo
If head and base repo are the same, reuse the already opened ctx.Repo.GitRepo
* Don't delegate to CleanupBranch, only reuse branch deletion code
CleanupBranch contains too much logic that has already been performed by the Merge
* Reuse gitrepo in MergePullRequest
Co-authored-by: Andrew Thornton <art27@cantab.net>
The current default memory cache implementation is unbounded in size and number of
objects cached. This is hardly ideal.
This PR proposes creating a TwoQueue LRU cache as the underlying cache for Gitea.
The cache is limited by the number of objects stored in the cache (rather than size)
for simplicity. The default number of objects is 50000 - which is perhaps too small
as most of our objects cached are going to be much less than 1kB.
It may be worth considering using a different LRU implementation that actively limits
sizes or avoids GC - however, this is just a beginning implementation.
Signed-off-by: Andrew Thornton <art27@cantab.net>
The current CSRF handler is a bit harsh with bad CSRF tokens on webpages
I think we can be a little kinder and redirect to base page with a flash error
Signed-off-by: Andrew Thornton <art27@cantab.net>
If a pre-post-processed file contains relative img tags these need to be updated
and joined correctly with the prefix. Finally, the node attributes need to be updated.
Fix#16308
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Fix modified files list in webhooks when there is a space
There is an unfortunate bug with GetCommitFileStatus where files with
spaces are misparsed and split at the space.
There is a second bug because modern gits detect renames meaning that
this function no longer works correctly.
There is a third bug in that merge commits don't have their modified
files detected correctly.
Fix#15865
Signed-off-by: Andrew Thornton <art27@cantab.net>
Following the merging of https://github.com/go-git/go-git/pull/330 we
can now add a setting to avoid go-git reading and caching large objects.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately go doesn't always ensure that execd processes are completely
waited for. On linux this means that zombie processes can occur.
This PR ensures that these are waited for by using signal notifier in serv and
passing a context elsewhere.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Use `..` instead of `...` with `rev-list`. In combination with #16282 the receiver can get the correct commit. The behaviour is now like Github.
fixes#11802
* Make the github migration less rate limit waiting to get comment per page from repository but not per issue
* Fix lint
* adjust Downloader interface
* Fix missed reviews
* Fix test
* Remove unused struct
There is a bug with last commit cache recursive cache where the last
commit information that refers to the current tree itself will cause a
panic due to its path ("") not being included in the expected tree entry
paths.
This PR fixes this by skipping the missing entry.
Fix#16290
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Upgrade Gliderlabs SSH to 0.3.3 and add FailedConnectionCallback
Following the merging of https://github.com/gliderlabs/ssh/pull/143 we
can now report connections to the ssh server that have failed before
public key exchange has completed using the standard fail2ban message.
This PR updates Gliderlabs SSH and adds a callback that will provide this
logging.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* move the callback to its own function to make the logging appear little nicer
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR removes multiple unneeded fields from the `HookTask` struct and adds the two headers `X-Hub-Signature` and `X-Hub-Signature-256`.
## ⚠️ BREAKING ⚠️
* The `Secret` field is no longer passed as part of the payload.
* "Breaking" change (or fix?): The webhook history shows the real called url and not the url registered in the webhook (`deliver.go`@129).
Close#16115Fixes#7788Fixes#11755
Co-authored-by: zeripath <art27@cantab.net>
Now that #16069 is merged, some sites may wish to enforce that users are all public, limited or private, and/or disallow users from becoming private.
This PR adds functionality and settings to constrain a user's ability to change their visibility.
Co-authored-by: zeripath <art27@cantab.net>
One of the repeatedly reported issues has been that gitea produces too much console
logging during set up even if the console logger is turned off.
Fundamentally this is due to some otherwise very helpful logging that has to occur
before logging is set up. This has come to a head with the merging of #16243 where
otherwise potentially helpful Trace logging in the git module now appears on the
console.
This PR proposes three things:
1. Change the initial default logger to Info not Trace.
2. Change the logging for the AppPath things to Info in recompense.
3. Add two new command line options to gitea web: --quiet and --verbose
`gitea web -q` or `gitea web --quiet` will only log Fatal level initially.
`gitea web -verbose` will log at Trace.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
You can limit or hide organisations. This pull make it also posible for users
- new strings to translte
- add checkbox to user profile form
- add checkbox to admin user.edit form
- filter explore page user search
- filter api admin and public user searches
- allow admins view "hidden" users
- add app option DEFAULT_USER_VISIBILITY
- rewrite many files to use Visibility field
- check for teams intersection
- fix context output
- right fake 404 if not visible
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Fuzzer finds an NPE due to incorrect URLPrefix
The Fuzzer is running on a non-repo urlprefix which is incorrect for RenderRaw
* Make FindRenderizableReferenceNumeric and getReferences more efficient
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Added support for gopher URLs.
* Add setting and make this user settable instead
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
remove log() func from gogs times and switch to proper logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Fix 500 Error with branch and tag sharing the same name #15592
Fixed 500 error while create Pull request when there are more
than one sources (branch, tag) with the same name
Fix#15592
Signed-off-by: Viktor Yakovchuk <viktor@yakovchuk.net>
* fix logging
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
* #14559 Reduce amount of email notifications for WIP draft PR's
don't notify repo watchers of WIP draft PR's
* #13190 Notification when WIP Pull Request is ready for review
* Send email notification to repo watchers when WIP PR is created
* Send ui notification to repo watchers when WIP PR is created
* send specific email notification when PR is marked ready for review
instead of reusing the CreatePullRequest action
* Fix lint error
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Use html.Parse rather than html.ParseFragment
There have been a few issues with html.ParseFragment - just use html.Parse instead.
* Skip document node
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More efficiently parse shas for shaPostProcessor
The shaPostProcessor currently repeatedly calls git rev-parse --verify on both backends
which is fine if there is only one thing that matches a sha - however if there are
multiple things then this becomes wildly inefficient.
This PR provides functions for both backends which are much faster to use.
Fix#16092
* Add ShaExistCache to RenderContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Improve get last commit using git log --name-status
git log --name-status -c provides information about the diff between a
commit and its parents. Using this and adjusting the algorithm to use
the first change to a path allows for a much faster generation of commit
info.
There is a subtle change in the results generated but this will cause
the results to more closely match those from elsewhere.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
There is an inefficiency in the design of our processors which means that Emoji
and other processors run in order n^2 time.
This PR forces the processors to process the entirety of text node before passing
back up. The fundamental inefficiency remains but it should be significantly
ameliorated.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* invent ctx.QueryOptionalBool
* [API] ListReleases add draft and pre-release filter
* Add X-Total-Count header
* Add a release to fixtures
* Add TEST for API ListReleases
* Ensure settings for Service and Mailer are read on the install page
NewContext does not set the mailer or service settings so add
a new function that will run this.
Fix#15894
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
There are a couple of settings in `[indexer]` relating to the `issue_indexer` queue
which override settings in unpredictable ways. This PR adjusts this hierarchy and makes
explicit that these settings are deprecated.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add migrating message
Signed-off-by: Andrew Thornton <art27@cantab.net>
* simplify messenger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* make messenger an interface
Signed-off-by: Andrew Thornton <art27@cantab.net>
* rename
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prepare for merge
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per tech
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Bluemonday sanitizer regexp rules are not additive, so the addition of the icons,
emojis and chroma syntax policy has led to this being stripped.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Set self-adjusting deadline for connection writing
In #16055 it appears that the simple 5s deadline doesn't work for large
file writes. Now we can't - or at least shouldn't just set no deadline
as go will happily let these connections block indefinitely. However,
what seems reasonable is to set some minimum rate we expect for writing.
This PR suggests the following algorithm:
* Every write has a minimum timeout of 5s (adjustable at compile time.)
* If there has been a previous write - then consider its previous
deadline, add half of the minimum timeout + 2s per kb about to written.
* If that new deadline is after the minimum timeout use that.
Fix#16055
* Linearly increase timeout
* Make PerWriteTimeout, PerWritePerKbTimeouts configurable
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Make modules/context.Context a context.Context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify context calls
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Set the base context for requests to the HammerContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
* pass context into get-last-commit
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make commit_info cancellable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use context as context
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Restructured code. Moved static checks out of loop.
* Restructured batch api. Add support for individual errors.
* Let router decide if LFS is enabled.
* Renamed methods.
* Return correct status from verify handler.
* Unified media type check in router.
* Changed error code according to spec.
* Moved checks into router.
* Removed invalid v1 api methods.
* Unified methods.
* Display better error messages.
* Added size parameter. Create meta object on upload.
* Use object error on invalid size.
* Skip upload if object exists.
* Moved methods.
* Suppress fields in response.
* Changed error on accept.
* Added tests.
* Use ErrorResponse object.
* Test against message property.
* Add support for the old invalid lfs client.
* Fixed the check because MinIO wraps the error.
* Use individual repositories.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Added type sniffer.
* Switched content detection from base to typesniffer.
* Added GuessContentType to Blob.
* Moved image info logic to client.
Added support for SVG images in diff.
* Restore old blocked svg behaviour.
* Added missing image formats.
* Execute image diff only when container is visible.
* add margin to spinner
* improve BIN tag on image diffs
* Default to render view.
* Show image diff on incomplete diff.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* encrypt migration credentials in task persistence
Not sure this is the best approach, we could encrypt the entire
`PayloadContent` instead. Also instead of clearing individual fields in
payload content, we could just delete the task once it has
(successfully) finished..?
* remove credentials of past migrations
* only run DB migration for completed tasks
* fix binding
* add omitempty
* never serialize unencrypted credentials
* fix import order
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Unfortunately go panics you try to cast a nil interface{} as another primitive
therefore you need to check interfaces are not nil before casting.
Fix#16025
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Make modules/context.Context a context.Context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify context calls
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Set the base context for requests to the HammerContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Use route to serve assets but not middleware
* Fix build error with bindata tag
* convert path to absolute
* fix build
* reduce function stack
* Add tests for assets
* Remove test for assets because they are not generated
* Use a http function to serve assets
* Still use middleware to serve assets then less middleware stack for assets
* Move serveContent to original position
* remove unnecessary blank line change
* Fix bug for /assets* requests
* clean code
Co-authored-by: zeripath <art27@cantab.net>
It appears that people have been using token authentication to navigate to raw paths
and recent changes have broken this. Whilst ideally these paths would not be being used
like this - it was not the intention to be a breaking change.
This PR restores access to these paths.
Fix#13772
Signed-off-by: Andrew Thornton <art27@cantab.net>
As revealed by #15964 there is inconsistent use of filepath Join and path Join
for these directories. The best thing to do is to use filepath.Join but then ToSlash
them for consistency.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
This PR suggests a change to the default configuration for queues:
* Use a common DATADIR for the queues
* Set starting workers to 0 and make boost a single worker
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Double the avatar size factor
This results on finer Avatar rendering on Hi-DPI display.
* fix test
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* add a new internal hook to save ssh log
as title, when a ssh error ocure like #15785.
only when switch ``RUN_MODE`` to dev can we
found which error is ocure. But this way is
not a good idea for production envirment.
this changes try save ssh error mesage to the
log file like other log by a new internal hook.
I think it's usefull for find error message
in production envirment. Thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
* rename and fix nit
* Update modules/private/hook.go
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Encrypt LDAP bind password in db with SECRET_KEY
The LDAP source bind password are currently stored in plaintext in the db
This PR simply encrypts them with the setting.SECRET_KEY.
Fix#15460
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove ui warning regarding unencrypted password
Co-authored-by: silverwind <me@silverwind.io>
* Hold the event source when there are no listeners
The event source does not need to run when there are no listeners. Therefore
pause it when there are none.
* add some more logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create a session on ReverseProxy and ensure that ReverseProxy users cannot change username
ReverseProxy users should generate a session on reverse proxy username change.
Also prevent ReverseProxy users from changing their username.
Fix#2407
* add testcase
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Prevent double-login for Git HTTP and LFS and simplify login
There are a number of inconsistencies with our current methods for
logging in for git and lfs. The first is that there is a double login
process. This is particularly evident in 1.13 where there are no less
than 4 hash checks for basic authentication due to the previous
IsPasswordSet behaviour.
This duplicated code had individual inconsistencies that were not
helpful and caused confusion.
This PR does the following:
* Remove the specific login code from the git and lfs handlers except
for the lfs special bearer token
* Simplify the meaning of DisableBasicAuthentication to allow Token and
Oauth2 sign-in.
* The removal of the specific code from git and lfs means that these
both now have the same login semantics and can - if not
DisableBasicAuthentication - login from external services. Further it
allows Oauth2 token authentication as per our standard mechanisms.
* The change in the recovery handler prevents the service from
re-attempting to login - primarily because this could easily cause a
further panic and it is wasteful.
* add test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* move shutdownfns, terminatefns and hammerfns out of separate goroutines
Coalesce the shutdownfns etc into a list of functions that get run at shutdown
rather then have them run at goroutines blocked on selects.
This may help reduce the background select/poll load in certain
configurations.
* The LevelDB queues can actually wait on empty instead of polling
Slight refactor to cause leveldb queues to wait on empty instead of polling.
* Shutdown the shadow level queue once it is empty
* Remove bytefifo additional goroutine for readToChan as it can just be run in run
* Remove additional removeWorkers goroutine for workers
* Simplify the AtShutdown and AtTerminate functions and add Channel Flusher
* Add shutdown flusher to CUQ
* move persistable channel shutdown stuff to Shutdown Fn
* Ensure that UPCQ has the correct config
* handle shutdown during the flushing
* reduce risk of race between zeroBoost and addWorkers
* prevent double shutdown
Signed-off-by: Andrew Thornton <art27@cantab.net>
In #15826 it has become apparent that there are a few occasions when a response can
hang during writing, and because there is no timeout go will happily just block
interminably. This PR adds a fixed 5 second timeout to all writes to a connection.
Fix#15826
Signed-off-by: Andrew Thornton <art27@cantab.net>
Fixes http: superfluous response.WriteHeader call from code.gitea.io/gitea/modules/context.(*Response).WriteHeader (response.go:67)
* Looking again we don't need this writeHeader as all of our downstream
implementations will always do it for us
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Unfortunately some old repositories can have tags with empty Tagger, Commit
or Author. Go-Git variants will always have empty values for these whereas
the native git variant leaves them at nil. The simplest solution is just to
always have these set to empty Signatures.
v156 migration also makes the incorrect assumption that these cannot be empty.
Therefore add some handling to this and add logging and adjust broken
logging elsewhere in this migration.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Decouple TestAction_GetRepoLink and TestSizedAvatarLink.
* Load database for TestCheckGPGUserEmail.
* Load database for TestMakeIDsFromAPIAssigneesToAdd.
* Load database for TestGetUserIDsByNames and TestGetMaileableUsersByIDs.
* Load database for TestUser_ToUser.
* Load database for TestRepository_EditWikiPage.
* Include AppSubURL in test.
* Prevent panic with empty slice.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Queue manager FlushAll can loop rapidly - add delay
Add delay within FlushAll to prevent rapid loop when workers are busy
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Move restore repo to internal router and invoke from command to avoid open the same db file or queues files
* Follow @zeripath's review
* set no timeout for resotre repo private request
* make restore repo cancelable
* Use single shared random string generation function
- Replace 3 functions that do the same with 1 shared one
- Use crypto/rand over math/rand for a stronger RNG
- Output only alphanumerical for URL compatibilty
Fixes: #15536
* use const string method
* Update modules/avatar/avatar.go
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: a1012112796 <1012112796@qq.com>
It is currenly impossible to detect which "SSO" method is responsible for login. This
PR adds some basic trace logging to these methods.
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR is another in the vein of queue improvements. It suggests an
exponential backoff for bytefifo queues to reduce the load from queue
polling. This will mostly be useful for redis queues.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Drop back to use IsAnInteractiveSession for SVC
There is an apparent permission change problem when using
IsWindowsService to determine if the SVC manager should be
used.
This PR simply drops back to using IsAnInteractiveSession as
this does not change behaviour.
Fix#15454
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Yes staticcheck I know this is deprecated
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Just leave me alone lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* fix some ui bug about draft release
- should not show draft release in tag list because
it will't create real tag
- still show draft release without tag and commit message
for draft release instead of 404 error
- remove tag load for attachement links because it's useless
Signed-off-by: a1012112796 <1012112796@qq.com>
* add test code
* fix test
That's because has added a new release in relaese test database.
* fix dropdown link for draft release
There was a mistake in #15372 where deferral of gitrepo close occurs before it should.
This PR fixes this.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Since the move to Chi the number of stack frames has proliferated somewhat catastrophically and we're up to 96 frames with multiple tests of the url outside of a trie which is inefficient.
This PR reduces the number of stack frames by 6 through careful use of Route, moves Captcha into its own router so that it only fires on Captcha routes, similarly for avatars and repo-avatars.
The robots.txt, / and apple-touch-icon.png are moved out of requiring Contexter.
It moves access logger higher in the stack frame because there is no reason why it can't be higher.
Extract from #15186
Contains #15292
There is a bug setting the redis db in the common nosql manager whereby the db path
always fails.
This PR fixes this.
Signed-off-by: Andrew Thornton <art27@cantab.net>
There is a potential race in TestChannelQueue_Batch due to boost workers starting up
This PR simply removes the boosts from this test.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* The leveldb shadow queue of a persistable channel queue should always start with 0
workers and just use boost to add additional workers if necessary.
* create a zero boost so that if there are no workers in a pool - boost to start the workers
* actually set timeout appropriately on boosted workers
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Improve performance when there are multiple commits in the last commit cache
* read refs directly if we can
Signed-off-by: Andrew Thornton <art27@cantab.net>
#15546 doesn't completely fix this problem because the error returned is an ObjectNotExist
error not a BranchNotExist error.
Add test for ErrObjectNotExist too
Fix#15257
Signed-off-by: Andrew Thornton <art27@cantab.net>
* If the default branch is not present do not report error on stats indexing
Fix#15257
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Fix#15236
* Do not do 40byte conversion within ParseTreeLine
* Missed a to40ByteSHA
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Fix#14793.
The previous implementation used the first return value of matcher.Match, which is the chosen language tag but may contain extensions such as de-DE-u-rg-chzzzz.
As mentioned in the documentation of language package, matcher.Match also returns the index of the supported tags, so I think it is better to use it rather than manipulate the returned language tag.
There is a weird gotcha with GetTagCommitID that because it uses git rev-list
can cause an ambiguous argument error.
This PR simply makes tags use the same code as branches.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Refactored handleOAuth2SignIn in routers/user/auth.go
The function handleOAuth2SignIn was called twice but some code path could only
be reached by one of the invocations. Moved the unnecessary code path out of
handleOAuth2SignIn.
* Refactored user creation
There was common code to create a user and display the correct error message.
And after the creation the only user should be an admin and if enabled a
confirmation email should be sent. This common code is now abstracted into
two functions and a helper function to call both.
* Added auto-register for OAuth2 users
If enabled new OAuth2 users will be registered with their OAuth2 details.
The UserID, Name and Email fields from the gothUser are used.
Therefore the OpenID Connect provider needs additional scopes to return
the coresponding claims.
* Added error for missing fields in OAuth2 response
* Linking and auto linking on oauth2 registration
* Set default username source to nickname
* Add automatic oauth2 scopes for github and google
* Add hint to change the openid connect scopes if fields are missing
* Extend info about auto linking security risk
Co-authored-by: Viktor Kuzmin <kvaster@gmail.com>
Signed-off-by: Martin Michaelis <code@mgjm.de>
* Links in markdown should be absolute to the repository not the server
Fix#15075
Signed-off-by: Andrew Thornton <art27@cantab.net>
* match github
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add testcase
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
The issue is that the TestPatch will reset the PR MergeBase - and it is possible for TestPatch to update the MergeBase whilst a merge is ongoing. The ensuing merge will then complete but it doesn't re-set the MergeBase it used to merge the PR.
Fixes the intermittent error in git test.
Signed-off-by: Andrew Thornton art27@cantab.net
* Upgrade to bluemonday 1.0.7
Fix#15349
Signed-off-by: Andrew Thornton <art27@cantab.net>
* resolve unit test
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* _ to unused func options
* rm useless brakets
* rm trifial non used models functions
* rm dead code
* rm dead global vars
* fix routers/api/v1/repo/issue.go
* dont overload import module
* Implemented LFS client.
* Implemented scanning for pointer files.
* Implemented downloading of lfs files.
* Moved model-dependent code into services.
* Removed models dependency. Added TryReadPointerFromBuffer.
* Migrated code from service to module.
* Centralised storage creation.
* Removed dependency from models.
* Moved ContentStore into modules.
* Share structs between server and client.
* Moved method to services.
* Implemented lfs download on clone.
* Implemented LFS sync on clone and mirror update.
* Added form fields.
* Updated templates.
* Fixed condition.
* Use alternate endpoint.
* Added missing methods.
* Fixed typo and make linter happy.
* Detached pointer parser from gogit dependency.
* Fixed TestGetLFSRange test.
* Added context to support cancellation.
* Use ReadFull to probably read more data.
* Removed duplicated code from models.
* Moved scan implementation into pointer_scanner_nogogit.
* Changed method name.
* Added comments.
* Added more/specific log/error messages.
* Embedded lfs.Pointer into models.LFSMetaObject.
* Moved code from models to module.
* Moved code from models to module.
* Moved code from models to module.
* Reduced pointer usage.
* Embedded type.
* Use promoted fields.
* Fixed unexpected eof.
* Added unit tests.
* Implemented migration of local file paths.
* Show an error on invalid LFS endpoints.
* Hide settings if not used.
* Added LFS info to mirror struct.
* Fixed comment.
* Check LFS endpoint.
* Manage LFS settings from mirror page.
* Fixed selector.
* Adjusted selector.
* Added more tests.
* Added local filesystem migration test.
* Fixed typo.
* Reset settings.
* Added special windows path handling.
* Added unit test for HTTPClient.
* Added unit test for BasicTransferAdapter.
* Moved into util package.
* Test if LFS endpoint is allowed.
* Added support for git://
* Just use a static placeholder as the displayed url may be invalid.
* Reverted to original code.
* Added "Advanced Settings".
* Updated wording.
* Added discovery info link.
* Implemented suggestion.
* Fixed missing format parameter.
* Added Pointer.IsValid().
* Always remove model on error.
* Added suggestions.
* Use channel instead of array.
* Update routers/repo/migrate.go
* fmt
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
Forms are dependent on models and therefore should be in services.
This PR also removes the old auth. aliasing
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Whilst doing other work I have noticed that there is an issue with Wrap when passing an
http.Handler - the next should be the next handler in line not empty.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Close file on invalid range.
* Close on seek error
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Moved 'Seek' into server.
* io.ReadSeekCloser is only available in Go 1.16
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Close file on invalid range.
* Close on seek error
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Unexport SendUserMail
* Instead of "[]*models.User" or "[]string" lists infent "[]*MailRecipient" for mailer
* adopt
* code format
* TODOs for "i18n"
* clean
* no fallback for lang -> just use english
* lint
* exec testComposeIssueCommentMessage per lang and use only emails
* rm MailRecipient
* Dont reload from users from db if you alredy have in ram
* nits
* minimize diff
Signed-off-by: 6543 <6543@obermui.de>
* localize subjects
* linter ...
* Tr extend
* start tmpl edit ...
* Apply suggestions from code review
* use translation.Locale
* improve mailIssueCommentBatch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add i18n to datas
Signed-off-by: Andrew Thornton <art27@cantab.net>
* a comment
Co-authored-by: Andrew Thornton <art27@cantab.net>
`enry.IsVendor` is kinda slow as it simply iterates across all regexps.
This PR ajdusts the regexps to combine them to make this process a
little quicker.
Related #15143
Signed-off-by: Andrew Thornton <art27@cantab.net>
* response 404 for diff/patch of a commit that not exist
fix#15217
Signed-off-by: a1012112796 <1012112796@qq.com>
* Update routers/repo/commit.go
Co-authored-by: silverwind <me@silverwind.io>
* use ctx.NotFound()
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Unfortunately #14623 changed from the deprecated IsInteractiveSession to
IsWindowsService without recognising that they are the complement of
each other.
This means that Windows SVC control is not working correctly. This PR
adds some Tracing statements but also fixes the bug.
Fix#15159
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Implements request #14320 The rendering of CSV files does match the diff style.
* Moved CSV logic into base package.
* Added method to create a tabular diff.
* Added CSV compare context.
* Added CSV diff template.
* Use new table style in CSV markup.
* Added file size limit for CSV rendering.
* Display CSV parser errors in diff.
* Lazy read single file.
* Lazy read rows for full diff.
* Added unit tests for various CSV changes.
in previouse if a log subsetcion not set level
it will use ``info`` as default value.
this pr will make default value (``[log] -> LEVEL``) useable.
example config:
```INI
[log]
MODE = console
LEVEL = Trace
[log.console]
LEVEL =
STDERR = false
```
previous result:
```JSON
// console:
{
"level": "info",
...................
}
```
after change:
```JSON
// console:
{
"level": "track",
...................
}
```
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
git gc cron could change the size of the repository therefore we should update the
size of the repo stored in our database.
Also significantly improve the efficiency of counting lfs associated with the
repository
The API call: GET /repos/{owner}/{repo}/pulls/{index}/reviews/{id}/comments
returns always the reviewer, but should return the poster.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
* move "copy uploaded lfs files 2 repo" to own function for "defer file.Close()"
* rm type overload
* Update modules/repofiles/upload.go
Co-authored-by: zeripath <art27@cantab.net>
* Never add labels not from this repository or organisation and remove org labels on transfer
Prevent the addition of labels from outside of the repository or
organisation and remove organisation labels on transfer.
Related #14908
Signed-off-by: Andrew Thornton <art27@cantab.net>
* switch to use sql
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove AS
Signed-off-by: Andrew Thornton <art27@cantab.net>
* subquery alias
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Give me some AS?
Signed-off-by: Andrew Thornton <art27@cantab.net>
* double AS
Signed-off-by: Andrew Thornton <art27@cantab.net>
* try try again
Signed-off-by: Andrew Thornton <art27@cantab.net>
* once more around the merry go round
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix api problem
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add outside label consistency check into doctor
This PR adds another consistency check into doctor in order to detect
labels that have been added from outside of repositories and organisations
Fix#14908
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix migration
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prep for merge
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix postgres ID sequences broken by recreate-table
Unfortunately there is a subtle problem with recreatetable on postgres which
leads to the sequences not being renamed and not being left at 0.
Fix#14725
Signed-off-by: Andrew Thornton <art27@cantab.net>
* let us try information_schema instead
Signed-off-by: Andrew Thornton <art27@cantab.net>
* try again
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
* Fix an issue with panics related to attributes
* Wrap goldmark render in a recovery function
* Reduce memory use in render emoji
* Use a pipe for rendering goldmark - still needs more work and a limiter
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add reverse proxy configuration support for remote IP address validation
* Trust all IP addresses in containerized environments by default
* Use single option to specify networks and proxy IP addresses. By default trust all loopback IPs
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Ensure validation occurs on clone addresses too
Fix#14984
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix api tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Make sure sibling images get a link too
Due a problem with the ast.Walker in the our transformer in goldmark
an image with a sibling image will not be transformed to gain a parent
link. This PR fixes this.
Fix#12925
Signed-off-by: Andrew Thornton <art27@cantab.net>
