`[repository.pull-request] DELAY_CHECK_FOR_INACTIVE_DAYS` is a new
setting to delay the mergeable check for pull requests that have been
inactive for the specified number of days.
This avoids potentially long delays for big repositories with many pull
requests. and reduces system load overall when there are many
repositories or pull requests.
When viewing the PR, checking will start immediately and the PR merge
box will automatically reload when complete. Accessing the PR through
the API will also start checking immediately.
The default value of `7` provides a balance between system load, and
keeping behavior similar to what it was before both for users and API
access. With `0` all conflict checking will be delayed, while `-1`
always checks immediately to restore the previous behavior.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
When list commits, some of the commits authors are the same at many
situations. But current logic will always fetch the same GPG keys from
database. This PR will cache the GPG keys, emails and users for the
context so that reducing the database queries.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#33966
```
;; User must sign in to view anything.
;; It could be set to "expensive" to block anonymous users accessing some pages which consume a lot of resources,
;; for example: block anonymous AI crawlers from accessing repo code pages.
;; The "expensive" mode is experimental and subject to change.
;REQUIRE_SIGNIN_VIEW = false
```
Replace all contexts in tests with go1.24 t.Context()
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Some old code use direct type-casting to get context, it causes
problems.
This PR fixes all legacy problems and use correct `ctx.Value` to get
low-level contexts.
Fix#33518
Adds user facing messages to errors when submitting agit pull request
Tries to highlight the returned error more and fixes agit suggestion to
create PR on first submission.
Closes: https://github.com/go-gitea/gitea/issues/32965
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Resolve#32341
~Depends on #27151~
- [x] It will display a checkbox of deleting the head branch on the pull
request view page when starting an auto-merge task.
- [x] Add permission check before deleting the branch
- [x] Add delete branch comment for those closing pull requests because
of head branch or base branch was deleted.
- [x] Merge `RetargetChildrenOnMerge` and `AddDeletePRBranchComment`
into `service.DeleteBranch`.
Follow #33045. There are two updates on `Set Merged`, which should be in
one transaction.
This also introduced some refactors for changeissuestatus to make it
more clear.
In history (from some legacy frameworks), both `:name` and `name` are
supported as path path name, `:name` is an alias to `name`.
To make code consistent, now we should only use `name` but not `:name`.
Also added panic check in related functions to make sure the name won't
be abused in case some downstreams still use them.
Introduce RequestContext: is a short-lived context that is used to store
request-specific data.
RequestContext could be used to clean form tmp files, close context git
repo, and do some tracing in the future.
Then a lot of legacy code could be removed or improved. For example:
most `ctx.Repo.GitRepo.Close()` could be removed because the git repo
could be closed when the request is done.
Move all mail sender related codes into a sub package of
services/mailer. Just move, no code change.
Then we just have dependencies on go-mail package in the new sub
package. We can use other package to replace it because it's
unmaintainable. ref #18664
1. move "internal-lfs" route mock to "common-lfs"
2. fine tune tests
3. fix "realm" strings, according to RFC:
https://datatracker.ietf.org/doc/html/rfc2617:
* realm = "realm" "=" realm-value
* realm-value = quoted-string
4. clarify some names of the middlewares, rename `ignXxx` to `optXxx` to
match `reqXxx`, and rename ambiguous `requireSignIn` to `reqGitSignIn`
Gitea instance keeps reporting a lot of errors like "LFS SSH transfer connection denied, pure SSH protocol is disabled". When starting debugging the problem, there are more problems found. Try to address most of them:
* avoid unnecessary server side error logs (change `fail()` to not log them)
* figure out the broken tests/user2/lfs.git (added comments)
* avoid `migratePushMirrors` failure when a repository doesn't exist (ignore them)
* avoid "Authorization" (internal&lfs) header conflicts, remove the tricky "swapAuth" and use "X-Gitea-Internal-Auth"
* make internal token comparing constant time (it wasn't a serous problem because in a real world it's nearly impossible to timing-attack the token, but good to fix and backport)
* avoid duplicate routers (introduce AddOwnerRepoGitLFSRoutes)
* avoid "internal (private)" routes using session/web context (they should use private context)
* fix incorrect "path" usages (use "filepath")
* fix incorrect mocked route point handling (need to check func nil correctly)
* split some tests from "git general tests" to "git misc tests" (to keep "git_general_test.go" simple)
Still no correct result for Git LFS SSH tests. So the code is kept there
(`tests/integration/git_lfs_ssh_test.go`) and a FIXME explains the details.
Fix#31738
When pushing a new branch, the old commit is zero. Most git commands
cannot recognize the zero commit id. To get the changed files in the
push, we need to get the first diverge commit of this branch. In most
situations, we could check commits one by one until one commit is
contained by another branch. Then we will think that commit is the
diverge point.
And in a pre-receive hook, this will be more difficult because all
commits haven't been merged and they actually stored in a temporary
place by git. So we need to bring some envs to let git know the commit
exist.
Fixes#22722
### Problem
Currently, it is not possible to force push to a branch with branch
protection rules in place. There are often times where this is necessary
(CI workflows/administrative tasks etc).
The current workaround is to rename/remove the branch protection,
perform the force push, and then reinstate the protections.
### Solution
Provide an additional section in the branch protection rules to allow
users to specify which users with push access can also force push to the
branch. The default value of the rule will be set to `Disabled`, and the
UI is intuitive and very similar to the `Push` section.
It is worth noting in this implementation that allowing force push does
not override regular push access, and both will need to be enabled for a
user to force push.
This applies to manual force push to a remote, and also in Gitea UI
updating a PR by rebase (which requires force push)
This modifies the `BranchProtection` API structs to add:
- `enable_force_push bool`
- `enable_force_push_whitelist bool`
- `force_push_whitelist_usernames string[]`
- `force_push_whitelist_teams string[]`
- `force_push_whitelist_deploy_keys bool`
### Updated Branch Protection UI:
<img width="943" alt="image"
src="https://github.com/go-gitea/gitea/assets/79623665/7491899c-d816-45d5-be84-8512abd156bf">
### Pull Request `Update branch by Rebase` option enabled with source
branch `test` being a protected branch:
<img width="1038" alt="image"
src="https://github.com/go-gitea/gitea/assets/79623665/57ead13e-9006-459f-b83c-7079e6f4c654">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR only does "renaming":
* `Route` should be `Router` (and chi router is also called "router")
* `Params` should be `PathParam` (to distingush it from URL query param, and to match `FormString`)
* Use lower case for private functions to avoid exposing or abusing
Merging PR may fail because of various problems. The pull request may
have a dirty state because there is no transaction when merging a pull
request. ref
https://github.com/go-gitea/gitea/pull/25741#issuecomment-2074126393
This PR moves all database update operations to post-receive handler for
merging a pull request and having a database transaction. That means if
database operations fail, then the git merging will fail, the git client
will get a fail result.
There are already many tests for pull request merging, so we don't need
to add a new one.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Misspell 0.5.0 supports passing a csv file to extend the list of
misspellings, so I added some common ones from the codebase. There is at
least one typo in a API response so we need to decided whether to revert
that and then likely remove the dict entry.
Noteable additions:
- `redefines-builtin-id` forbid variable names that shadow go builtins
- `empty-lines` remove unnecessary empty lines that `gofumpt` does not
remove for some reason
- `superfluous-else` eliminate more superfluous `else` branches
Rules are also sorted alphabetically and I cleaned up various parts of
`.golangci.yml`.
Agit returned result should be from `ProcReceive` hook but not
`PostReceive` hook. Then for all non-agit pull requests, it will not
check the pull requests for every pushing `refs/pull/%d/head`.
Resolve#23848
This PR put an edit file button on pull request files to allow a quick
edit for a file. After the edit finished, it will return back to the
viewed file position on pull request files tab.
It also use a branch view file link instead of commit link when it's a
non-commit pull request files view.
<img width="1532" alt="image"
src="https://github.com/go-gitea/gitea/assets/81045/3637ca4c-89d5-4621-847b-79702a44f617">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Regression of #29493. If a branch has been deleted, repushing it won't
restore it.
Lunny may have noticed that, but I didn't delve into the comment then
overlooked it:
https://github.com/go-gitea/gitea/pull/29493#discussion_r1509046867
The additional comments added are to explain the issue I found during
testing, which are unrelated to the fixes.
Unlike other async processing in the queue, we should sync branches to
the DB immediately when handling git hook calling. If it fails, users
can see the error message in the output of the git command.
It can avoid potential inconsistency issues, and help #29494.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Since `modules/context` has to depend on `models` and many other
packages, it should be moved from `modules/context` to
`services/context` according to design principles. There is no logic
code change on this PR, only move packages.
- Move `code.gitea.io/gitea/modules/context` to
`code.gitea.io/gitea/services/context`
- Move `code.gitea.io/gitea/modules/contexttest` to
`code.gitea.io/gitea/services/contexttest` because of depending on
context
- Move `code.gitea.io/gitea/modules/upload` to
`code.gitea.io/gitea/services/context/upload` because of depending on
context
