Backport #30206 by wxiaoguang
1. check `IsActive` before calling `IsLastAdminUser`.
2. Fix some comments and error messages.
3. Don't `return err` if "removing file" fails in `DeleteUser`.
4. Remove incorrect `DeleteInactiveEmailAddresses`. Active users could
also have inactive emails, and inactive emails do not support
"olderThan"
5. Add tests
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Resolves#29965.
---
Manually tested this by:
- Following the
[installation](https://docs.gitea.com/next/installation/install-with-docker#basics)
guide (but built a local Docker image instead)
- Creating 2 users, one who is the `Owner` of a newly-created repository
and the other a `Collaborator`
- Had the `Collaborator` create a PR that the `Owner` reviews
- `Collaborator` resolves conversation and `Owner` merges PR
And with this change we see that we can no longer see re-request review
button for the `Owner`:
<img width="1351" alt="Screenshot 2024-03-25 at 12 39 18 AM"
src="https://github.com/go-gitea/gitea/assets/60799661/bcd9c579-3cf7-474f-a51e-b436fe1a39a4">
Resolve#23848
This PR put an edit file button on pull request files to allow a quick
edit for a file. After the edit finished, it will return back to the
viewed file position on pull request files tab.
It also use a branch view file link instead of commit link when it's a
non-commit pull request files view.
<img width="1532" alt="image"
src="https://github.com/go-gitea/gitea/assets/81045/3637ca4c-89d5-4621-847b-79702a44f617">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Fix#28761Fix#27884Fix#28093
## Changes
### Rerun all jobs
When rerun all jobs, status of the jobs with `needs` will be set to
`blocked` instead of `waiting`. Therefore, these jobs will not run until
the required jobs are completed.
### Rerun a single job
When a single job is rerun, its dependents should also be rerun, just
like GitHub does
(https://github.com/go-gitea/gitea/issues/28761#issuecomment-2008620820).
In this case, only the specified job will be set to `waiting`, its
dependents will be set to `blocked` to wait the job.
### Show warning if every job has `needs`
If every job in a workflow has `needs`, all jobs will be blocked and no
job can be run. So I add a warning message.
<img
src="https://github.com/go-gitea/gitea/assets/15528715/88f43511-2360-465d-be96-ee92b57ff67b"
width="480px" />
This PR will avoid load pullrequest.Issue twice in pull request list
page. It will reduce x times database queries for those WIP pull
requests.
Partially fix#29585
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This PR fixed a bug when the user switching pages too fast, he will
logout automatically.
The reason is that when the error is context cancelled, the previous
code think user hasn't login then the session will be deleted. Now it
will return the errors but not think it's not login.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Regression of #29493. If a branch has been deleted, repushing it won't
restore it.
Lunny may have noticed that, but I didn't delve into the comment then
overlooked it:
https://github.com/go-gitea/gitea/pull/29493#discussion_r1509046867
The additional comments added are to explain the issue I found during
testing, which are unrelated to the fixes.
When read the code: `pager.AddParam(ctx, "search", "search")`, the
question always comes: What is it doing? Where is the value from? Why
"search" / "search" ?
Now it is clear: `pager.AddParamIfExist("search", ctx.Data["search"])`
Fix#29763
This PR fixes 2 problems with CodeOwner in the pull request.
- Don't use the pull request base branch but merge-base as a diff base to
detect the code owner.
- CodeOwner detection in fork repositories will be disabled because
almost all the fork repositories will not change CODEOWNERS files but it
should not be used on fork repositories' pull requests.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The branch page for blender project will take 6s because calculating
divergence is very slow.
This PR will add a cache for the branch divergence calculation. So when
the second visit the branch list, it will take only less 200ms.
Refactor the webhook logic, to have the type-dependent processing happen
only in one place.
---
## Current webhook flow
1. An event happens
2. It is pre-processed (depending on the webhook type) and its body is
added to a task queue
3. When the task is processed, some more logic (depending on the webhook
type as well) is applied to make an HTTP request
This means that webhook-type dependant logic is needed in step 2 and 3.
This is cumbersome and brittle to maintain.
Updated webhook flow with this PR:
1. An event happens
2. It is stored as-is and added to a task queue
3. When the task is processed, the event is processed (depending on the
webhook type) to make an HTTP request
So the only webhook-type dependent logic happens in one place (step 3)
which should be much more robust.
## Consequences of the refactor
- the raw event must be stored in the hooktask (until now, the
pre-processed body was stored)
- to ensure that previous hooktasks are correctly sent, a
`payload_version` is added (version 1: the body has already been
pre-process / version 2: the body is the raw event)
So future webhook additions will only have to deal with creating an
http.Request based on the raw event (no need to adjust the code in
multiple places, like currently).
Moreover since this processing happens when fetching from the task
queue, it ensures that the queuing of new events (upon a `git push` for
instance) does not get slowed down by a slow webhook.
As a concrete example, the PR #19307 for custom webhooks, should be
substantially smaller:
- no need to change `services/webhook/deliver.go`
- minimal change in `services/webhook/webhook.go` (add the new webhook
to the map)
- no need to change all the individual webhook files (since with this
refactor the `*webhook_model.Webhook` is provided as argument)
Consider executable files as a valid case when returning a DownloadURL for them.
They are just regular files with the difference being the executable permission bit being set.
Co-authored-by: Gusted <postmaster@gusted.xyz>
After repository commit status has been introduced on dashaboard, the
most top SQL comes from `GetLatestCommitStatusForPairs`.
This PR adds a cache for the repository's default branch's latest
combined commit status. When a new commit status updated, the cache will
be marked as invalid.
<img width="998" alt="image"
src="https://github.com/go-gitea/gitea/assets/81045/76759de7-3a83-4d54-8571-278f5422aed3">
Unlike other async processing in the queue, we should sync branches to
the DB immediately when handling git hook calling. If it fails, users
can see the error message in the output of the git command.
It can avoid potential inconsistency issues, and help #29494.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR made the code simpler, reduced unnecessary database queries and
fixed some warnning for the errors.New .
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Also resolves a warning for current releases
```
| ##[group]GitHub Actions runtime token ACs
| ##[warning]Cannot parse GitHub Actions Runtime Token ACs: "undefined" is not valid JSON
| ##[endgroup]
====>
| ##[group]GitHub Actions runtime token ACs
| ##[endgroup]
```
\* this is an error in v3
References in the docker org:
-
831ca179d3/src/main.ts (L24)
-
7d8b4dc669/src/github.ts (L61)
No known official action of GitHub makes use of this claim.
Current releases throw an error when configure to use actions cache
```
| ERROR: failed to solve: failed to configure gha cache exporter: invalid token without access controls
| ##[error]buildx failed with: ERROR: failed to solve: failed to configure gha cache exporter: invalid token without access controls
```
