1
1
mirror of https://github.com/go-gitea/gitea synced 2024-11-09 19:54:25 +00:00
gitea/vendor/github.com/klauspost/compress/snappy/encode.go
PhilippHomann 684b7a999f
Dump: add output format tar and output to stdout (#10376)
* Dump: Use mholt/archive/v3 to support tar including many compressions

Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>

* Dump: Allow dump output to stdout

Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>

* Dump: Fixed bug present since #6677 where SessionConfig.Provider is never "file"

Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>

* Dump: never pack RepoRootPath, LFS.ContentPath and LogRootPath when they are below AppDataPath

Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>

* Dump: also dump LFS (fixes #10058)

Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>

* Dump: never dump CustomPath if CustomPath is a subdir of or equal to AppDataPath (fixes #10365)

Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>

* Use log.Info instead of fmt.Fprintf

Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>

* import ordering

* make fmt

Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Matti R <matti@mdranta.net>
2020-06-05 16:47:39 -04:00

286 lines
8.9 KiB
Go
Vendored

// Copyright 2011 The Snappy-Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package snappy
import (
"encoding/binary"
"errors"
"io"
)
// Encode returns the encoded form of src. The returned slice may be a sub-
// slice of dst if dst was large enough to hold the entire encoded block.
// Otherwise, a newly allocated slice will be returned.
//
// The dst and src must not overlap. It is valid to pass a nil dst.
func Encode(dst, src []byte) []byte {
if n := MaxEncodedLen(len(src)); n < 0 {
panic(ErrTooLarge)
} else if len(dst) < n {
dst = make([]byte, n)
}
// The block starts with the varint-encoded length of the decompressed bytes.
d := binary.PutUvarint(dst, uint64(len(src)))
for len(src) > 0 {
p := src
src = nil
if len(p) > maxBlockSize {
p, src = p[:maxBlockSize], p[maxBlockSize:]
}
if len(p) < minNonLiteralBlockSize {
d += emitLiteral(dst[d:], p)
} else {
d += encodeBlock(dst[d:], p)
}
}
return dst[:d]
}
// inputMargin is the minimum number of extra input bytes to keep, inside
// encodeBlock's inner loop. On some architectures, this margin lets us
// implement a fast path for emitLiteral, where the copy of short (<= 16 byte)
// literals can be implemented as a single load to and store from a 16-byte
// register. That literal's actual length can be as short as 1 byte, so this
// can copy up to 15 bytes too much, but that's OK as subsequent iterations of
// the encoding loop will fix up the copy overrun, and this inputMargin ensures
// that we don't overrun the dst and src buffers.
const inputMargin = 16 - 1
// minNonLiteralBlockSize is the minimum size of the input to encodeBlock that
// could be encoded with a copy tag. This is the minimum with respect to the
// algorithm used by encodeBlock, not a minimum enforced by the file format.
//
// The encoded output must start with at least a 1 byte literal, as there are
// no previous bytes to copy. A minimal (1 byte) copy after that, generated
// from an emitCopy call in encodeBlock's main loop, would require at least
// another inputMargin bytes, for the reason above: we want any emitLiteral
// calls inside encodeBlock's main loop to use the fast path if possible, which
// requires being able to overrun by inputMargin bytes. Thus,
// minNonLiteralBlockSize equals 1 + 1 + inputMargin.
//
// The C++ code doesn't use this exact threshold, but it could, as discussed at
// https://groups.google.com/d/topic/snappy-compression/oGbhsdIJSJ8/discussion
// The difference between Go (2+inputMargin) and C++ (inputMargin) is purely an
// optimization. It should not affect the encoded form. This is tested by
// TestSameEncodingAsCppShortCopies.
const minNonLiteralBlockSize = 1 + 1 + inputMargin
// MaxEncodedLen returns the maximum length of a snappy block, given its
// uncompressed length.
//
// It will return a negative value if srcLen is too large to encode.
func MaxEncodedLen(srcLen int) int {
n := uint64(srcLen)
if n > 0xffffffff {
return -1
}
// Compressed data can be defined as:
// compressed := item* literal*
// item := literal* copy
//
// The trailing literal sequence has a space blowup of at most 62/60
// since a literal of length 60 needs one tag byte + one extra byte
// for length information.
//
// Item blowup is trickier to measure. Suppose the "copy" op copies
// 4 bytes of data. Because of a special check in the encoding code,
// we produce a 4-byte copy only if the offset is < 65536. Therefore
// the copy op takes 3 bytes to encode, and this type of item leads
// to at most the 62/60 blowup for representing literals.
//
// Suppose the "copy" op copies 5 bytes of data. If the offset is big
// enough, it will take 5 bytes to encode the copy op. Therefore the
// worst case here is a one-byte literal followed by a five-byte copy.
// That is, 6 bytes of input turn into 7 bytes of "compressed" data.
//
// This last factor dominates the blowup, so the final estimate is:
n = 32 + n + n/6
if n > 0xffffffff {
return -1
}
return int(n)
}
var errClosed = errors.New("snappy: Writer is closed")
// NewWriter returns a new Writer that compresses to w.
//
// The Writer returned does not buffer writes. There is no need to Flush or
// Close such a Writer.
//
// Deprecated: the Writer returned is not suitable for many small writes, only
// for few large writes. Use NewBufferedWriter instead, which is efficient
// regardless of the frequency and shape of the writes, and remember to Close
// that Writer when done.
func NewWriter(w io.Writer) *Writer {
return &Writer{
w: w,
obuf: make([]byte, obufLen),
}
}
// NewBufferedWriter returns a new Writer that compresses to w, using the
// framing format described at
// https://github.com/google/snappy/blob/master/framing_format.txt
//
// The Writer returned buffers writes. Users must call Close to guarantee all
// data has been forwarded to the underlying io.Writer. They may also call
// Flush zero or more times before calling Close.
func NewBufferedWriter(w io.Writer) *Writer {
return &Writer{
w: w,
ibuf: make([]byte, 0, maxBlockSize),
obuf: make([]byte, obufLen),
}
}
// Writer is an io.Writer that can write Snappy-compressed bytes.
type Writer struct {
w io.Writer
err error
// ibuf is a buffer for the incoming (uncompressed) bytes.
//
// Its use is optional. For backwards compatibility, Writers created by the
// NewWriter function have ibuf == nil, do not buffer incoming bytes, and
// therefore do not need to be Flush'ed or Close'd.
ibuf []byte
// obuf is a buffer for the outgoing (compressed) bytes.
obuf []byte
// wroteStreamHeader is whether we have written the stream header.
wroteStreamHeader bool
}
// Reset discards the writer's state and switches the Snappy writer to write to
// w. This permits reusing a Writer rather than allocating a new one.
func (w *Writer) Reset(writer io.Writer) {
w.w = writer
w.err = nil
if w.ibuf != nil {
w.ibuf = w.ibuf[:0]
}
w.wroteStreamHeader = false
}
// Write satisfies the io.Writer interface.
func (w *Writer) Write(p []byte) (nRet int, errRet error) {
if w.ibuf == nil {
// Do not buffer incoming bytes. This does not perform or compress well
// if the caller of Writer.Write writes many small slices. This
// behavior is therefore deprecated, but still supported for backwards
// compatibility with code that doesn't explicitly Flush or Close.
return w.write(p)
}
// The remainder of this method is based on bufio.Writer.Write from the
// standard library.
for len(p) > (cap(w.ibuf)-len(w.ibuf)) && w.err == nil {
var n int
if len(w.ibuf) == 0 {
// Large write, empty buffer.
// Write directly from p to avoid copy.
n, _ = w.write(p)
} else {
n = copy(w.ibuf[len(w.ibuf):cap(w.ibuf)], p)
w.ibuf = w.ibuf[:len(w.ibuf)+n]
w.Flush()
}
nRet += n
p = p[n:]
}
if w.err != nil {
return nRet, w.err
}
n := copy(w.ibuf[len(w.ibuf):cap(w.ibuf)], p)
w.ibuf = w.ibuf[:len(w.ibuf)+n]
nRet += n
return nRet, nil
}
func (w *Writer) write(p []byte) (nRet int, errRet error) {
if w.err != nil {
return 0, w.err
}
for len(p) > 0 {
obufStart := len(magicChunk)
if !w.wroteStreamHeader {
w.wroteStreamHeader = true
copy(w.obuf, magicChunk)
obufStart = 0
}
var uncompressed []byte
if len(p) > maxBlockSize {
uncompressed, p = p[:maxBlockSize], p[maxBlockSize:]
} else {
uncompressed, p = p, nil
}
checksum := crc(uncompressed)
// Compress the buffer, discarding the result if the improvement
// isn't at least 12.5%.
compressed := Encode(w.obuf[obufHeaderLen:], uncompressed)
chunkType := uint8(chunkTypeCompressedData)
chunkLen := 4 + len(compressed)
obufEnd := obufHeaderLen + len(compressed)
if len(compressed) >= len(uncompressed)-len(uncompressed)/8 {
chunkType = chunkTypeUncompressedData
chunkLen = 4 + len(uncompressed)
obufEnd = obufHeaderLen
}
// Fill in the per-chunk header that comes before the body.
w.obuf[len(magicChunk)+0] = chunkType
w.obuf[len(magicChunk)+1] = uint8(chunkLen >> 0)
w.obuf[len(magicChunk)+2] = uint8(chunkLen >> 8)
w.obuf[len(magicChunk)+3] = uint8(chunkLen >> 16)
w.obuf[len(magicChunk)+4] = uint8(checksum >> 0)
w.obuf[len(magicChunk)+5] = uint8(checksum >> 8)
w.obuf[len(magicChunk)+6] = uint8(checksum >> 16)
w.obuf[len(magicChunk)+7] = uint8(checksum >> 24)
if _, err := w.w.Write(w.obuf[obufStart:obufEnd]); err != nil {
w.err = err
return nRet, err
}
if chunkType == chunkTypeUncompressedData {
if _, err := w.w.Write(uncompressed); err != nil {
w.err = err
return nRet, err
}
}
nRet += len(uncompressed)
}
return nRet, nil
}
// Flush flushes the Writer to its underlying io.Writer.
func (w *Writer) Flush() error {
if w.err != nil {
return w.err
}
if len(w.ibuf) == 0 {
return nil
}
w.write(w.ibuf)
w.ibuf = w.ibuf[:0]
return w.err
}
// Close calls Flush and then closes the Writer.
func (w *Writer) Close() error {
w.Flush()
ret := w.err
if w.err == nil {
w.err = errClosed
}
return ret
}