Fix#26685
If a commit status comes from Gitea Actions and the user cannot access
the repo's actions unit (the user does not have the permission or the
actions unit is disabled), a 404 page will occur after clicking the
"Details" link. We should hide the "Details" link in this case.
<img
src="https://github.com/go-gitea/gitea/assets/15528715/68361714-b784-4bb5-baab-efde4221f466"
width="400px" />
This leverages the existing `sync_external_users` cron job to
synchronize the `IsActive` flag on users who use an OAuth2 provider set
to synchronize. This synchronization is done by checking for expired
access tokens, and using the stored refresh token to request a new
access token. If the response back from the OAuth2 provider is the
`invalid_grant` error code, the user is marked as inactive. However, the
user is able to reactivate their account by logging in the web browser
through their OAuth2 flow.
Also changed to support this is that a linked `ExternalLoginUser` is
always created upon a login or signup via OAuth2.
### Notes on updating permissions
Ideally, we would also refresh permissions from the configured OAuth
provider (e.g., admin, restricted and group mappings) to match the
implementation of LDAP. However, the OAuth library used for this `goth`,
doesn't seem to support issuing a session via refresh tokens. The
interface provides a [`RefreshToken`
method](https://github.com/markbates/goth/blob/master/provider.go#L20),
but the returned `oauth.Token` doesn't implement the `goth.Session` we
would need to call `FetchUser`. Due to specific implementations, we
would need to build a compatibility function for every provider, since
they cast to concrete types (e.g.
[Azure](https://github.com/markbates/goth/blob/master/providers/azureadv2/azureadv2.go#L132))
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
#26996
Added default sorting for milestones by name.
Additional, name for sorting closestduedate and furthestduedate was
broken, so I fixed it.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
We have some instances that only allow using an external authentication
source for authentication. In this case, users changing their email,
password, or linked OpenID connections will not have any effect, and
we'd like to prevent showing that to them to prevent confusion.
Included in this are several changes to support this:
* A new setting to disable user managed authentication credentials
(email, password & OpenID connections)
* A new setting to disable user managed MFA (2FA codes & WebAuthn)
* Fix an issue where some templates had separate logic for determining
if a feature was disabled since it didn't check the globally disabled
features
* Hide more user setting pages in the navbar when their settings aren't
enabled
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Before we had just the plain mail address as recipient. But now we
provide additional Information for the Mail clients.
---
*Sponsored by Kithara Software GmbH*
Fixes#22722
### Problem
Currently, it is not possible to force push to a branch with branch
protection rules in place. There are often times where this is necessary
(CI workflows/administrative tasks etc).
The current workaround is to rename/remove the branch protection,
perform the force push, and then reinstate the protections.
### Solution
Provide an additional section in the branch protection rules to allow
users to specify which users with push access can also force push to the
branch. The default value of the rule will be set to `Disabled`, and the
UI is intuitive and very similar to the `Push` section.
It is worth noting in this implementation that allowing force push does
not override regular push access, and both will need to be enabled for a
user to force push.
This applies to manual force push to a remote, and also in Gitea UI
updating a PR by rebase (which requires force push)
This modifies the `BranchProtection` API structs to add:
- `enable_force_push bool`
- `enable_force_push_whitelist bool`
- `force_push_whitelist_usernames string[]`
- `force_push_whitelist_teams string[]`
- `force_push_whitelist_deploy_keys bool`
### Updated Branch Protection UI:
<img width="943" alt="image"
src="https://github.com/go-gitea/gitea/assets/79623665/7491899c-d816-45d5-be84-8512abd156bf">
### Pull Request `Update branch by Rebase` option enabled with source
branch `test` being a protected branch:
<img width="1038" alt="image"
src="https://github.com/go-gitea/gitea/assets/79623665/57ead13e-9006-459f-b83c-7079e6f4c654">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
closes#22015
After adding a passkey, you can now simply login with it directly by
clicking `Sign in with a passkey`.
Note for testing. You need to run gitea using `https` to get the full
passkeys experience.
---------
Co-authored-by: silverwind <me@silverwind.io>
This PR enhances the labels handling in issue_search by optimizing the
SQL query and de-duplicate the IDs when generating the query string.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
1. There are already global "unit consts", no need to use context data, which is fragile
2. Remove the "String()" method from "unit", it would only cause rendering problems in templates
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix#31361, and add tests
And this PR introduces an undocumented & debug-purpose-only config
option: `USE_SUB_URL_PATH`. It does nothing for end users, it only helps
the development of sub-path related problems.
And also fix#31366
Co-authored-by: @ExplodingDragon
fix a bug from #30490
`prs.GetIssueIDs()` will also be used in other places, e.g.
`InvalidateCodeComments`
so we should not add `if pr.Issue == nil` in it, or if `pr.Issue` is
already loaded, you will not get the issueID in the results list and
this is not an expected result.
So this will caused a bug:
before calling `InvalidateCodeComments`, all `pr.Issues` in `prs` are
loaded, so `issueIDs` in this function will always be `[]`.
Enable [unparam](https://github.com/mvdan/unparam) linter.
Often I could not tell the intention why param is unused, so I put
`//nolint` for those cases like webhook request creation functions never
using `ctx`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Resolves#31167.
https://github.com/go-gitea/gitea/pull/30885 changed the behavior of
`repo.AvatarLink()` where it can now take the empty string and append it
to the app data URL. This does not point to a valid avatar image URL,
and, as the issue mentions, previous Gitea versions returned the empty
string.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR implemented object storages(LFS/Packages/Attachments and etc.)
for Azure Blob Storage. It depends on azure official golang SDK and can
support both the azure blob storage cloud service and azurite mock
server.
Replace #25458Fix#22527
- [x] CI Tests
- [x] integration test, MSSQL integration tests will now based on
azureblob
- [x] unit test
- [x] CLI Migrate Storage
- [x] Documentation for configuration added
------
TODO (other PRs):
- [ ] Improve performance of `blob download`.
---------
Co-authored-by: yp05327 <576951401@qq.com>
This PR split the `Board` into two parts. One is the struct has been
renamed to `Column` and the second we have a `Template Type`.
But to make it easier to review, this PR will not change the database
schemas, they are just renames. The database schema changes could be in
future PRs.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: yp05327 <576951401@qq.com>
This PR adds some fields to the gitea webhook payload that
[openproject](https://www.openproject.org/) expects to exists in order
to process the webhooks.
These fields do exists in Github's webhook payload so adding them makes
Gitea's native webhook more compatible towards Github's.
Replace #25741Close#24445Close#30658Close#20646
~Depends on #30805~
Since #25741 has been rewritten totally, to make the contribution
easier, I will continue the work in this PR. Thanks @6543
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Remove "EncodeSha1", it shouldn't be used as a general purpose hasher
(just like we have removed "EncodeMD5" in #28622)
Rewrite the "time-limited code" related code and write better tests, the
old code doesn't seem quite right.
Fix#30872
We will assume the database is consistent before executing the
migration. So the indexes should exist. Removing `IF EXIST` then is safe
enough.
---------
Co-authored-by: silverwind <me@silverwind.io>
# The problem
The previous implementation will start multiple POST requests from the
frontend when moving a column and another bug is moving the default
column will never be remembered in fact.
# What's changed
- [x] This PR will allow the default column to move to a non-first
position
- [x] And it also uses one request instead of multiple requests when
moving the columns
- [x] Use a star instead of a pin as the icon for setting the default
column action
- [x] Inserted new column will be append to the end
- [x] Fix#30701 the newly added issue will be append to the end of the
default column
- [x] Fix when deleting a column, all issues in it will be displayed
from UI but database records exist.
- [x] Add a limitation for columns in a project to 20. So the sorting
will not be overflow because it's int8.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
If an user is deactivated, it should not be in the list of users who are
suggested to be assigned or review-requested.
old assignees or reviewers are not affected.
---
*Sponsored by Kithara Software GmbH*
Suggested by logs in #30729
- Remove `math/rand.Seed`
`rand.Seed is deprecated: As of Go 1.20 there is no reason to call Seed
with a random value.`
- Replace `math/rand.Read`
`rand.Read is deprecated: For almost all use cases, [crypto/rand.Read]
is more appropriate.`
- Replace `math/rand` with `math/rand/v2`, which is available since Go
1.22
Follow #30472:
When a user is created by command line `./gitea admin user create`:
Old behavior before #30472: the first user (admin or non-admin) doesn't
need to change password.
Revert to the old behavior before #30472
Misspell 0.5.0 supports passing a csv file to extend the list of
misspellings, so I added some common ones from the codebase. There is at
least one typo in a API response so we need to decided whether to revert
that and then likely remove the dict entry.
Follow #30454
And fix#24957
When using "preferred_username", if no such field,
`extractUserNameFromOAuth2` (old `getUserName`) shouldn't return an
error. All other USERNAME options do not return such error.
And fine tune some logic and error messages, make code more stable and
more friendly to end users.
Follow #29468
1. Interpolate runs-on with variables when scheduling tasks.
2. The `GetVariablesOfRun` function will check if the `Repo` of the run
is nil.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Noteable additions:
- `redefines-builtin-id` forbid variable names that shadow go builtins
- `empty-lines` remove unnecessary empty lines that `gofumpt` does not
remove for some reason
- `superfluous-else` eliminate more superfluous `else` branches
Rules are also sorted alphabetically and I cleaned up various parts of
`.golangci.yml`.
Fixes#28255
The new query uses the id field to sort by "newer". This most not be
correct (usually it is) but it's faster (see #28255).
If someone has a better idea, please propose changes.
Co-authored-by: Giteabot <teabot@gitea.io>
Follow #30495
"HasAccess" behavior wasn't clear, to make it clear:
* Use a new name `HasAnyUnitAccess`, it will be easier to review related
code and permission problems.
* Separate everyone access mode to a separate field, then all calls to
HasAccess are reverted to old behavior before #30495.
* Add new tests.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
The target_url is necessary for the UI, but missed in
commit_status_summary table. This PR fix it.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR adds a new table named commit status summary to reduce queries
from the commit status table. After this change, commit status summary
table will be used for the final result, commit status table will be for
details.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
When repo is a mirror, and commit author is an external user, then
`GetUserByEmail` will return error.
reproduce/test:
- mirror Gitea to your instance
- disable action and enable it again, this will trigger
`DetectAndHandleSchedules`
ps: also follow #24706, it only fixed normal runs, not scheduled runs.
As the latest tag of `github.com/denisenkom/go-mssqldb` is in 2022, but
as a fork of it, `github.com/microsoft/go-mssqldb` has more activities
than the original repository. We can convert the driver to the fork.
Since the interface of Go database driver are the same, it should have
no any affect for the end users.
Fix#30243
We only checking unit disabled when detecting workflows, but not in
runner `FetchTask`.
So if a workflow was detected when action unit is enabled, but disabled
later, `FetchTask` will still return these detected actions.
Global setting: repo.ENABLED and repository.`DISABLED_REPO_UNITS` will
not effect this.
Fix#29074 (allow to disable all builtin apps) and don't make the doctor
command remove the builtin apps.
By the way, rename refobject and joincond to camel case.
Fixes#30235
If the key id "front" byte has a single digit, `%X` is missing the 0
prefix.
` 38D1A3EADDBEA9C` instead of
`038D1A3EADDBEA9C`
When using the `IssuerFingerprint` slice `%X` is enough but I changed it
to `%016X` too to be consistent.
1. check `IsActive` before calling `IsLastAdminUser`.
2. Fix some comments and error messages.
3. Don't `return err` if "removing file" fails in `DeleteUser`.
4. Remove incorrect `DeleteInactiveEmailAddresses`. Active users could
also have inactive emails, and inactive emails do not support
"olderThan"
5. Add tests
## Changes
- Adds setting `EXTERNAL_USER_DISABLE_FEATURES` to disable any supported
user features when login type is not plain
- In general, this is necessary for SSO implementations to avoid
inconsistencies between the external account management and the linked
account
- Adds helper functions to encourage correct use
Fix https://github.com/go-gitea/gitea/pull/29874#discussion_r1542227686
- The migration of v292 will miss many projects. These projects will
have no default board. This PR introduced a new migration number and
removed v292 migration.
- This PR also added the missed transactions on project-related
operations.
- Only `SetDefaultBoard` will remove duplicated defaults but not in
`GetDefaultBoard`
Resolves#29965.
---
Manually tested this by:
- Following the
[installation](https://docs.gitea.com/next/installation/install-with-docker#basics)
guide (but built a local Docker image instead)
- Creating 2 users, one who is the `Owner` of a newly-created repository
and the other a `Collaborator`
- Had the `Collaborator` create a PR that the `Owner` reviews
- `Collaborator` resolves conversation and `Owner` merges PR
And with this change we see that we can no longer see re-request review
button for the `Owner`:
<img width="1351" alt="Screenshot 2024-03-25 at 12 39 18 AM"
src="https://github.com/go-gitea/gitea/assets/60799661/bcd9c579-3cf7-474f-a51e-b436fe1a39a4">
This PR replaces the use of `max( id )`, and instead using ``max(
`index` )`` for determining the latest commit status. Building business
logic over an `auto_increment` primary key like `id` is risky and
there’re already plenty of discussions on the Internet.
There‘s no guarantee for `auto_increment` values to be monotonic,
especially upon failures or with a cluster. In the specific case, we met
the problem of commit statuses being outdated when using TiDB as the
database. As [being
documented](https://docs.pingcap.com/tidb/stable/auto-increment),
`auto_increment` values assigned to an `insert` statement will only be
monotonic on a per server (node) basis.
Closes#30074.
On creation of an empty project (no template) a default board will be
created instead of falling back to the uneditable pseudo-board.
Every project now has to have exactly one default boards. As a
consequence, you cannot unset a board as default, instead you have to
set another board as default. Existing projects will be modified using a
cron job, additionally this check will run every midnight by default.
Deleting the default board is not allowed, you have to set another board
as default to do it.
Fixes#29873Fixes#14679 along the way
Fixes#29853
Co-authored-by: delvh <dev.lh@web.de>
Help #29999, or its tests cannot pass.
Also, add some comments to clarify the usage of `TxContext`.
I don't check all usages of `TxContext` because there are too many
(almost 140+). It's a better idea to replace them with `WithTx` instead
of checking them one by one. However, that may be another refactoring
PR.
This PR uses `db.ListOptions` instead of `Paginor` to make the code
simpler.
And it also fixed the performance problem when viewing /pulls or
/issues. Before the counting in fact will also do the search.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: silverwind <me@silverwind.io>
This PR adds `setting.Service.DefaultOrgMemberVisible` value to dataset
of user when the initial org creator is being added to the created org.
Fixes#30012.
This PR will avoid load pullrequest.Issue twice in pull request list
page. It will reduce x times database queries for those WIP pull
requests.
Partially fix#29585
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#29763
This PR fixes 2 problems with CodeOwner in the pull request.
- Don't use the pull request base branch but merge-base as a diff base to
detect the code owner.
- CodeOwner detection in fork repositories will be disabled because
almost all the fork repositories will not change CODEOWNERS files but it
should not be used on fork repositories' pull requests.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR do some performance optimzations.
- [x] Add `index` for the column `comment_id` of `Attachment` table to
accelerate query from the database.
- [x] Remove unnecessary database queries when viewing issues. Before
some conditions which id = 0 will be sent to the database
- [x] Remove duplicated load posters
- [x] Batch loading attachements, isread of comments on viewing issue
---------
Co-authored-by: Zettat123 <zettat123@gmail.com>
This PR do some loading speed optimization for feeds user interface
pages.
- Load action users batchly but not one by one.
- Load action repositories batchly but not one by one.
- Load action's Repo Owners batchly but not one by one.
- Load action's possible issues batchly but not one by one.
- Load action's possible comments batchly but not one by one.
Refactor the webhook logic, to have the type-dependent processing happen
only in one place.
---
## Current webhook flow
1. An event happens
2. It is pre-processed (depending on the webhook type) and its body is
added to a task queue
3. When the task is processed, some more logic (depending on the webhook
type as well) is applied to make an HTTP request
This means that webhook-type dependant logic is needed in step 2 and 3.
This is cumbersome and brittle to maintain.
Updated webhook flow with this PR:
1. An event happens
2. It is stored as-is and added to a task queue
3. When the task is processed, the event is processed (depending on the
webhook type) to make an HTTP request
So the only webhook-type dependent logic happens in one place (step 3)
which should be much more robust.
## Consequences of the refactor
- the raw event must be stored in the hooktask (until now, the
pre-processed body was stored)
- to ensure that previous hooktasks are correctly sent, a
`payload_version` is added (version 1: the body has already been
pre-process / version 2: the body is the raw event)
So future webhook additions will only have to deal with creating an
http.Request based on the raw event (no need to adjust the code in
multiple places, like currently).
Moreover since this processing happens when fetching from the task
queue, it ensures that the queuing of new events (upon a `git push` for
instance) does not get slowed down by a slow webhook.
As a concrete example, the PR #19307 for custom webhooks, should be
substantially smaller:
- no need to change `services/webhook/deliver.go`
- minimal change in `services/webhook/webhook.go` (add the new webhook
to the map)
- no need to change all the individual webhook files (since with this
refactor the `*webhook_model.Webhook` is provided as argument)
The tests on migration tests failed but CI reports successfully
https://github.com/go-gitea/gitea/actions/runs/7364373807/job/20044685969#step:8:141
This PR will fix the bug on migration v283 and also the CI hidden
behaviour.
The reason is on the Makefile
`GITEA_ROOT="$(CURDIR)" GITEA_CONF=tests/mysql.ini $(GO) test
$(GOTESTFLAGS) -tags='$(TEST_TAGS)' $(MIGRATE_TEST_PACKAGES)` will
return the error exit code.
But
`for pkg in $(shell $(GO) list
code.gitea.io/gitea/models/migrations/...); do \
GITEA_ROOT="$(CURDIR)" GITEA_CONF=tests/mysql.ini $(GO) test
$(GOTESTFLAGS) -tags '$(TEST_TAGS)' $$pkg; \
done`
will not work.
This also fix#29602
Unlike other async processing in the queue, we should sync branches to
the DB immediately when handling git hook calling. If it fails, users
can see the error message in the output of the git command.
It can avoid potential inconsistency issues, and help #29494.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fix for regressions introduced by #28805
Enabled projects on repos created before the PR weren't detected. Also,
the way projects mode was detected in settings didn't match the way it
was detected on permission check, which leads to confusion.
Co-authored-by: Giteabot <teabot@gitea.io>
Part of #23318
Add menu in repo settings to allow for repo admin to decide not just if
projects are enabled or disabled per repo, but also which kind of
projects (repo-level/owner-level) are enabled. If repo projects
disabled, don't show the projects tab.
---------
Co-authored-by: delvh <dev.lh@web.de>
To avoid conflicting with User.GetDisplayName, because there is no data
type in template.
And it matches other methods like GetActFullName / GetActUserName
* Follow #17746: `HasIssueContentHistory` should use expr builder to
make sure zero value (0) be respected.
* Add "doer" check to make sure `canSoftDeleteContentHistory` only be
called by sign-in users.
This PR touches the most interesting part of the "template refactoring".
1. Unclear variable type. Especially for "web/feed/convert.go":
sometimes it uses text, sometimes it uses HTML.
2. Assign text content to "RenderedContent" field, for example: `
project.RenderedContent = project.Description` in web/org/projects.go
3. Assign rendered content to text field, for example: `r.Note =
rendered content` in web/repo/release.go
4. (possible) Incorrectly calling `{{Str2html
.PackageDescriptor.Metadata.ReleaseNotes}}` in
package/content/nuget.tmpl, I guess the name Str2html misleads
developers to use it to "render string to html", but it only sanitizes.
if ReleaseNotes really contains HTML, then this is not a problem.
just some refactoring bits towards replacing **util.OptionalBool** with
**optional.Option[bool]**
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Thanks to inferenceus : some sort orders on the "explore/users" page
could list users by their lastlogintime/updatetime.
It leaks user's activity unintentionally. This PR makes that page only
use "supported" sort orders.
Removing the "sort orders" could also be a good solution, while IMO at
the moment keeping the "create time" and "name" orders is also fine, in
case some users would like to find a target user in the search result,
the "sort order" might help.
Fix#14459
The following users can add/remove review requests of a PR
- the poster of the PR
- the owner or collaborators of the repository
- members with read permission on the pull requests unit
Adds a new API `/repos/{owner}/{repo}/commits/{sha}/pull` that allows
you to get the merged PR associated to a commit.
---------
Co-authored-by: 6543 <6543@obermui.de>
- Databases are one of the most important parts of Forgejo, every
interaction uses the database in one way or another. Therefore, it is
important to maintain the database and recognize when the server is not
doing well with the database. There already is the option to log *every*
SQL query along with its execution time, but monitoring becomes
impractical for larger instances and takes up unnecessary storage in the
logs.
- Add a QoL enhancement that allows instance administrators to specify a
threshold value beyond which query execution time is logged as a warning
in the xorm logger. The default value is a conservative five seconds to
avoid this becoming a source of spam in the logs.
- The use case for this patch is that with an instance the size of
Codeberg, monitoring SQL logs is not very fruitful and most of them are
uninteresting. Recently, in the context of persistent deadlock issues
(https://codeberg.org/forgejo/forgejo/issues/220), I have noticed that
certain queries hold locks on tables like comment and issue for several
seconds. This patch helps to identify which queries these are and when
they happen.
- Added unit test.
(cherry picked from commit 9cf501f1af4cd870221cef6af489618785b71186)
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
